Nuova ricerca


Dettaglio della ricerca

Nome e cognome Daniele Forni

Funzione Laboratorio SUPSI Dynamat, docente-ricercatore
Istituto materiali e costruzioni, docente-ricercatore

Email daniele.forni@supsi.ch

Ufficio Trevano - Blocco C
Via Trevano, 6952 Canobbio

Telefono interno +41586666396

vCard

Dati anagrafici Daniele Forni nasce a Varese il 22 settembre 1980.

Formazione Daniele studia al Politecnico di Torino dall'anno accademico 1999/2000, laureandosi con lode nel luglio 2005 in ingegneria civile con la tesi "Modellazione meccanica di un tessuto gerarchico unidimensionale di ispirazione biolologica".

Esperienze professionali Da dicembre 2005 inizia a la sua esperienza lavorativa presso l'Istituto Materiali e Costruzioni della SUPSI. Collabora con il prof. Cadoni presso il Laboratorio interdipartimentale DynaMat. Dal 2010 è docente-ricercatore. Dal 2005 al 2008, in collaborazione con il prof. Cadoni, sviluppa la piattaforma didattica TEMAS (www.e-temas.ch), nell'ambito del programma federale "Swiss Virtual Campus". Attualmente è responsabile del corso di Approfondimenti strutturali I, e docente titolare dei corsi di Teoria delle Strutture, Statica e Murature nel Bachelor di architettura.

Competenze Acquisizione e analisi dati, monitoraggio strutturale e delle vibrazioni, analisi e esecuzione prove ad alta velocità di deformazione, analisi FEM, programmazione con Matlab.

Articolo di un giornale scientifico 39 Elementi

Cadoni, E.& Forni, D. (2019) Austenitic Stainless Steel Under Extreme Combined Conditions of Loading and Temperature. Journal of Dynamic Behavior of Materials. » in dettaglio Cadoni, E., Forni, D., Bonnet, E.& Svatopluk Dubrusky, S. (2019) Experimental study on direct tensile behaviour of UHPFRC under high strain-rates. Construction and Building Materials, vol. 218 pp.667-680. » in dettaglio Cadoni, E., Dotta, M.& Forni, D. (2018) Behaviour of UHPFRCs in compression under high stress-rates. EPJ Web Conf., vol. 183 pp.2005-2005. » in dettaglio Cadoni, E., Fontana, M., Forni, D.& Knobloch, M. (2018) High strain rates testing and constitutive modeling of B500B reinforcing steel at elevated temperatures. The European Physical Journal Special Topics, vol. 227 (1) pp.179-199. » in dettaglio Cadoni, E., Forni, D., Gieleta, R.& Kruszka, L. (2018) Tensile and compressive behaviour of S355 mild steel in a wide range of strain rates. The European Physical Journal Special Topics, vol. 227 (1) pp.29-43. » in dettaglio Coppola, L., Coffetti, D., Crotti, E., Forni, D.& Cadoni, E. (2018) Fiber reinforced mortars based on free Portland-CSA binders under high stress rate. EPJ Web Conf., vol. 183 pp.4013-4013. » in dettaglio Curosu, I., Mechtcherine, V., Forni, D.& Cadoni, E. (2018) Dynamic Tensile Behaviour of Strain-Hardening Cement-Based Composites (SHCC). EPJ Web Conf., vol. 183 pp.2015-2015. » in dettaglio Dobruský, S., Forni, D.& Cadoni, E. (2018) Response of UHPFRCs in Tension under High Stress Rate. EPJ Web Conf., vol. 183 pp.4003-4003. » in dettaglio Fenu, L., Aymerich, F., Francesconi, L., Forni, D., Tesio, N.& Cadoni, E. (2018) Dynamic behaviour of an earthen material under different impact loading conditions. EPJ Web Conf., vol. 183 pp.2014-2014. » in dettaglio Luccioni, B., Isla, F., Forni, D.& Cadoni, E. (2018) Modelling UHPFRC tension behavior under high strain rates. Cement and Concrete Composites, vol. 91 pp.209-220. » in dettaglio Cadoni, E., Dotta, M., Forni, D.& Kaufmann, H. (2017) Tensile behaviour of commercial alluminium alloys used in armour applications at high strain rate. Procedia Engineering, vol. 197 pp.168-175. » in dettaglio Curosu, I., Mechtcherine, V., Forni, D.& Cadoni, E. (2017) Performance of various strain-hardening cement-based composites (SHCC) subject to uniaxial impact tensile loading. Cement and Concrete Research, vol. 102 pp.16-28. » in dettaglio Forni, D., Chiaia, B.& Cadoni, E. (2017) Blast effects on steel columns under fire conditions. Journal of Constructional Steel Research, vol. 136 pp.1-10. » in dettaglio Cadoni, E., Dotta, M.& Forni, D. (2016) Tensile behaviour of reinforcing steels at high strain rate and high temperature. Key Engineering Materials, vol. 711 pp.791-798. » in dettaglio Cadoni, E., Dotta, M., Forni, D.& Kaufmann, H. (2016) Effects of strain rate on mechanical properties in tension of a commercial aluminium alloy used in armour applications. Procedia Structural Integrity, vol. 2 pp.986-993. » in dettaglio Cadoni, E.& Forni, D. (2016) Experimental analysis of the UHPFRCs behavior under tension at high stress rate. The European Physical Journal Special Topics, vol. 225 pp.1-12. » in dettaglio Cadoni, E., Singh, N., Forni, D., Singha, M.& Gupta, N. (2016) Strain rate effects on the mechanical behavior of two Dual Phase steels in tension. The European Physical Journal Special Topics, vol. 225 pp.1-12. » in dettaglio Fenu, L., Forni, D.& Cadoni, E. (2016) Dynamic behaviour of cement mortars reinforced with glass and basalt fibres. Composites Part B: Engineering, vol. 92 (5) pp.142-150. » in dettaglio Forni, D., Chiaia, B.& Cadoni, E. (2016) High strain rate response of S355 at high temperatures. Materials and Design, vol. 94 pp.467-478. » in dettaglio Forni, D., Chiaia, B.& Cadoni, E. (2016) Strain rate behaviour in tension of S355 steel: Base for progressive collapse analysis. Engineering Structures, vol. 119 pp.164-173. » in dettaglio Luccioni, B., Isla, F., Forni, D.& Cadoni, E. (2016) Modelado de Hormigones de Ultra Altas Prestaciones Reforzados con Fibras bajo Altas Velocidades de Deformación. Mecánica Computacional, vol. XXXIV pp.199-223. » in dettaglio Bragov, A., Konstantinov, A., Lomunov, A., Forni, D., Riganti, G.& Cadoni, E. (2015) High strain rate response of UHP(FR)C in compression. EPJ Web of Conferences, vol. 94. » in dettaglio Cadoni, E., Dotta, M., Forni, D.& Spaetig, P. (2015) Influence of the temperature on the tension behaviour of EUROFER97 alloy at high strain rate. EPJ Web of Conferences, vol. 94 pp.1022-1022. » in dettaglio Cadoni, E., Dotta, M., Forni, D.& Tesio, N. (2015) High strain rate behaviour in tension of steel B500A reinforcing bar. Materials and Structures, vol. 48 (6) pp.1803-1813. » in dettaglio Cadoni, E.& Forni, D. (2015) Strain rate effects on reinforcing steels in tension. European Journal de Physique WoC, vol. 94 (01004). » in dettaglio Fenu, L., Forni, D.& Cadoni, E. (2015) Energy absorption at high strain rate of glass fiber reinforced mortars. EPJ Web of Conferences, vol. 94 pp.1030-1030. » in dettaglio Latella, C., Dotta, M., Forni, D., Tesio, N.& Cadoni, E. (2015) Influence of strain rate on the mechanical behaviour in tension of bovine cortical bone. EPJ Web of Conferences, vol. 94 pp.3001-3001. » in dettaglio Grazka, M., Janiszewski, J., Kruszka, L., Cadoni, E., Forni, D.& Riganti, G. (2014) Identification Methods of Parameters for Johnson-Cook Constitutive Equation - Comparison. Applied Mechanics and Materials, vol. 566 pp.97-103. » in dettaglio Cadoni, E., Dotta, M., Forni, D., Tesio, N.& Albertini, C. (2013) Mechanical behaviour of quenched and self-tempered reinforcing steel in tension under high strain rate. Materials and Design, vol. 49 (8) pp.657-666. » in dettaglio Cadoni, E., Bragov, A., Dotta, M., Forni, D., Konstantinov, A.& Lomunov, A. (2012) Mechanical characterization of rocks at high strain rate. EPJ Web of Conferences, vol. 26 pp.1021-1021. » in dettaglio Cadoni, E., Dotta, M., Forni, D., Bianchi, S.& Kaufmann, H. (2012) Strain rate effects on mechanical properties in tension of aluminium alloys used in armour applications. EPJ Web of Conferences, vol. 26 pp.5004-5004. » in dettaglio Cadoni, E., Fenu, L.& Forni, D. (2012) Strain rate behaviour in tension of austenitic stainless steel used for reinforcing bars. Construction and Building Materials, vol. 35 (0) pp.399-407. » in dettaglio Cadoni, E., Antonietti, S., Dotta, M.& Forni, D. (2011) Strain Rate Behaviour of three Rocks in Tension. Engineering Transactions, vol. 59 (3) pp.197-210. » in dettaglio Cadoni, E., Bragov, A., Dotta, M., Forni, D., Konstantinov, A., Lomunov, A.& Ripamonti, A. (2011) Mechanical Characterization of Steel for Fastening in a wide range of Strain Rate. Engineering Transactions, vol. 59 (2) pp.101-117. » in dettaglio Cadoni, E., Dotta, M., Forni, D.& Bianchi, S. (2011) Strain-rate effect on high strength alloys. Applied Mechanics and Materials, vol. 82 pp.124-129. » in dettaglio Cadoni, E., Dotta, M., Forni, D.& Spaetig, P. (2011) Strain-rate behavior in tension of the tempered martensitic reduced activation steel Eurofer97. Journal of Nuclear Materials, vol. 414 (3) pp.360-366. » in dettaglio Cadoni, E., Dotta, M., Forni, D.& Tesio, N. (2011) Dynamic behaviour of reinforcing steel bars in tension. Applied Mechanics and Materials, vol. 82 pp.86-91. » in dettaglio Coppola, L., Cadoni, E., Forni, D.& Buoso, A. (2011) Mechanical Characterization of Cement Composites Reinforced with Fiberglass, Carbon Nanotubes or Glass Reinforced Plastic (GRP) at High Strain Rates. Applied Mechanics and Materials, vol. 82 pp.190-195. » in dettaglio Cadoni, E., Forni, D.& Botturi, L. (2008) Learning by Seeing: The TEMAS Multimedia Learning Objects for Civil Engineers. TechTrends, vol. Volume (5) pp.17-21. » in dettaglio

Articolo in documento di una conferenza 20 Elementi

Cadoni, E.& Forni, D. (2019) High strain-rate response of UHPFRC in support of impact resistant structural design. In 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures FraMCoS-X. » in dettaglio Cadoni, E., Dotta, M.& Forni, D. (2017) Analysis of the Materials Behaviour at High Strain-Rate in Support of Impact Resistant Structural Design., pp.809-819. » in dettaglio Cadoni, E., Dotta, M., Forni, D.& Albertini, C. (2017) Dynamic behaviour of UHPC in compression by means of 3D-Modified Hopkinson Bar. In Proceedings of 6th International Conference on Design and Analysis of Protective Structures (DAPS 2017), pp.61-66. » in dettaglio Dobruský, S., Forni, D.& Cadoni, E. (2017) Mechanical Characterization of UHPC at High Strain Rate., pp.107-112. » in dettaglio Forni, D., Chiaia, B.& Cadoni, E. (2017) Effetti cinbubati du akta temperatura ed esplosione nello studio dell'innesco del collasso progressivo di strutture metalliche. In Ingegneria forense, crolli affidabilità strutturale e consolidamento, pp.493-504. » in dettaglio Forni, D., Chiaia, B.& Cadoni, E. (2017) Effetti combinati di temperatura ed esplosione nello studio dell'innesco del collasso progressivo di strutture metalliche. In Ingegneria forense, crolli affidabilità strutturale e consolidamento, pp.493-504. » in dettaglio Cadoni, E., Dotta, M.& Forni, D. (2016) Effect of the high temperature on the high strain rate behaviour of an austenitic stainless steel. » in dettaglio Curosu, I., Mechtcherine, V., Forni, D.& Cadoni, E. (2016) Influence of fibre type on the tensile behaviour of strain-hardening cement-based composites (SHCC) under impact loading. » in dettaglio Fenu, L., Congiu, E., Forni, D., Tesio, N.& Cadoni, E. (2016) Comparison between the dynamic behaviour of cement mortars reinforced with glass and basalt fibres. » in dettaglio Forni, D., Chiaia, B.& Cadoni, E. (2016) Mechanical properties of S355 under extreme coupled effect of high temperatures and high strain rates. » in dettaglio Cadoni, E., Dotta, M., Forni, D., Riganti, G.& Albertini, C. (2015) First application of the 3D-MHB on dynamic compressive behavior of UHPC. In EPJ Web of Conferences , pp.1031-1031. » in dettaglio Cadoni, E., Dotta, M., Forni, D., Riganti, G.& Kaufmann, H. (2015) Experimental and numerical analysis of the dynamic behaviour in tension of an armour steel for applications in defence industry. In EPJ Web of Conferences , pp.5004-5004. » in dettaglio Cadoni, E., Dotta, M., Forni, D., Riganti, G.& Tesio, N. (2013) Tensile behaviour at high strain rate of UHPFRC for protective structures. » in dettaglio Coppola, L., Cadoni, E., Forni, D.& Buoso, A. (2012) Caratterizzazione meccanica di compositi a base cementizia con fibre di vetro, di polipropilene rinforzato (GRP) e nanotubi di carbonio ad elevate velocità di deformazione. In Proceedings of XI Convegno Nazionale AIMAT, pp.157-160. » in dettaglio Cadoni, E., Dotta, M., Forni, D.& Spätig, P. (2011) Mechanical characterization of EUROFER97 in tension at high strain rate. » in dettaglio Coppola, L., Cadoni, E., Forni, D.& Buoso, A. (2011) Performance of multi-scale fiber reinforced cement composites at high strain rate. In The new boundaries of structural concrete, pp.235-241. » in dettaglio Spaetig, P., Cadoni, E., Dotta, M.& Forni, D. (2011) Static and dynamic tensile behavior at room temperature of the high-chromium reduced activation tempered martensitic steel Eurofer97. In IEA Workshop on Fusion Materials Modeling . » in dettaglio Cadoni, E., Dotta, M., Forni, D.& Bianchi, S. (2010) Effects of strain rate on mechanical properties in tension of an aluminium alloy used in armour applications. » in dettaglio Cadoni, E., Albertini, C.& Forni, D. (2008) Impact behaviour of materials: a tool for the de-sign of rockfall protective shelters. » in dettaglio Cadoni, E., Dotta, M., Forni, D., Albertini, C., D'Aiuto, F., Federici, C.& Maggi, S. (2008) Mechanical characterization of high strength steel at medium and high strain-rate as tool in impact structural assessment and design. In Impact Loading of Lightweight Structures. » in dettaglio

Capitolo di un libro 6 Elementi

Curosu, I., Mechtcherine, V., Forni, D.& Cadoni, E. 2017. Influence of Fiber Type on the Tensile Behavior of Strain-Hardening Cement-Based Composites (SHCC) Under Impact Loading. In Strain-Hardening Cement-Based Composites, pp.257-265. Springer. » in dettaglio Cadoni, E., Dotta, M., Forni, D., Asprone, D., Prota, A.& Manfredi, G. 2010. Dynamic characterization of concrete and reinforcing steel for the demolition of a bridge. In Structural Concrete in Switzerland, vol. 3, pp.28-31. FIB-CH. » in dettaglio Cadoni, E., Dotta, M., Forni, D., Caverzan, A.& di Prisco, M. 2010. Advanced cementitious composites in the design and construction of safe tunnels. In Structural Concrete in Switzerland, vol. 3, pp.12-15. FIB-CH. » in dettaglio Cadoni, E., Albertini, C., Dotta, M., Forni, D., Giorgetti, P.& Riganti, G. 2009. Mechanical characterization of rocks at high strain-rate by the JRC modified Hopkinson bar: a tool in blast and impact assessment. In Rock fragmentation by blasting, vol. 1, pp.35-41. Taylor & Francis Group. » in dettaglio Cadoni, E., Asprone, D., Dotta, M., Forni, D., Prota, A.& Manfredi, G. 2009. Investigation on dynamic behavior of a mediterranean natural stone under tensile loading. In Structures under extreme loading. National Defence Academy - Japan. » in dettaglio Cadoni, E., Dotta, M., Forni, D., Meda, A.& Plizzari, G. 2009. Rate Effects of High Performance Fibre Reinforced Cementitius Composite under tensile loading. In Mechanical and Physical Behaviour of Materials under Dynamic Loading, vol. 1, pp.809-815. EDP Sciences. » in dettaglio

Libro 2 Elementi

Forni, D., Chiaia, B.& Cadoni, E. (2016) effect of high strain rate on tensile properties of S355 steel at high temperature, The, Zingoni Alphose , Taylor & Francis Group, London. » in dettaglio Cadoni, E.& Forni, D. (2015) High strain rate behaviour in tension of different reinforcing steels, Kodur V.H.R ,Banthia N.K. , DEStech. » in dettaglio

Presentazione ad una conferenza 1 Elemento

Forni, D.& Cadoni, E.Experimental and numerical analysis of S355 steel under extreme coupled effect of high temperatures and high strain rates. , DYNAMIC BEHAVIOR OF MATERIALS. EXPERIMENTAL TESTS AND MODELLING OF MATERIALS UNDER HIGH STRAIN RATES, 2016, S.M. Tucuman, Argentine. » in dettaglio

Report 1 Elemento

Cadoni, E.& Forni, D. (2010) Mechanical behaviour of Basalt Fiber Reinforced Cementitius Composite under quasi static, medium and high strain rate. SUPSI. » in dettaglio

Tesi 1 Elemento

Forni, D. (2017) Progressive collapse induced by fire and blast. Politecnico di Torino. » in dettaglio

Progetti di cui è membro

Study of polymeric materials under dynamic conditions for building applications. » in dettaglio High strain-rate behaviour of E01141325 material at high and room temperature » in dettaglio Mechanical behavior of UHPFRC under high loading rate (impact, explosion, earthquake, hurricane). » in dettaglio Behaviour of structural steels under fire in a wide range of strain rates » in dettaglio Dynamic fracture of rocks under high rate mechanical and electric breakdown induced loads » in dettaglio Construction materials under high strain rate » in dettaglio Split Hopkinson bar test on UHPFRC/HPC » in dettaglio Triaxially Compressed Hopkinson Bar (TriHB) for Geomaterial and Construction Material Testing » in dettaglio Experimental investigations of high rate fracture in concrete and rocks » in dettaglio Rate and scale effects in fracture of concrete and rocks » in dettaglio Teaching and Advanced Research on high strain rate behaviour of materials and testing » in dettaglio Basalt fibre reiforced mortars » in dettaglio Analysis on the tensile behaviour of the titanium alloys under high strain rate » in dettaglio Mechanical characterization of polymers used in automotive industry » in dettaglio Dynamic behaviour of alluminium and titanium alloys » in dettaglio Dynamic behaviour of materials for industrial applications » in dettaglio Experimental studies on tensile dynamic behaviour of advanced materials » in dettaglio Mechanical characterization of advanced materials under dynamic loads » in dettaglio Advanced Cementitious Composites In DEsign and coNstruction of safe Tunnel » in dettaglio Fusion Energy Materials Science - Coordination Action » in dettaglio Sistemi Integrati Test Dinamici » in dettaglio Security of Airport Structures » in dettaglio Mechanical Characterizastion of Mediterranean Yellow Tuff » in dettaglio Studio del comportamento dinamico di lamiere in acciaio per il settore automobilistico » in dettaglio Twin Shape Composed Beam » in dettaglio Tenza Bridge Project » in dettaglio Laboratorio Interdipartimentale DynaMat » in dettaglio

 
st.wwwsupsi@supsi.ch