Nuova ricerca


Dettaglio della ricerca

Nome e cognome Ezio Cadoni

Funzione Dipartimento tecnologie innovative, professore
Dipartimento ambiente costruzioni e design, professore

Email ezio.cadoni@supsi.ch

Ufficio Trevano - Blocco C
Via Trevano, 6952 Canobbio

Telefono interno +41586666377

vCard

Formazione - Laurea in Ingegneria Civile (summa cum laude) presso Università di Cagliari - Dottorato di ricerca in Ingegneria strutturale presso il Politecnico di Torino

Esperienze professionali Agente Scientifico presso il CCR della Commissione europea Ingegnere presso Società di Ingegneria Specialista presso laboratorio prove

Competenze Caratterizzazione meccanica di materiali e strutture

Riconoscimenti Presidente DYMAT "European association for the promotion of research into the dynamic behaviour of materials and its applications" dal 2015 al 2018.

Articolo di un giornale scientifico 89 Elementi

Cadoni, E.& Forni, D. (2019) Austenitic Stainless Steel Under Extreme Combined Conditions of Loading and Temperature. Journal of Dynamic Behavior of Materials. » in dettaglio Cadoni, E.& Forni, D. (2019) Mechanical behaviour of a very-high strength steel (S960QL) under extreme conditions of high strain rates and elevated temperatures. Fire Safety Journal, vol. 109. » in dettaglio Cadoni, E., Forni, D., Bonnet, E.& Svatopluk Dubrusky, S. (2019) Experimental study on direct tensile behaviour of UHPFRC under high strain-rates. Construction and Building Materials, vol. 218 pp.667-680. » in dettaglio Bazaud, E., Cosculluela, A., Couque, H.& Cadoni, E. (2018) Advances in the characterization, modelling and simulation of materials subjected to dynamic loading. The European Physical Journal Special Topics, vol. 227 (1) pp.1-2. » in dettaglio Cadoni, E. (2018) Foreword. EPJ Web Conf., vol. 183 pp.1-1. » in dettaglio Cadoni, E. (2018) Mechanical characterization of alloys in extreme conditions of high strain rates and high temperature. IOP Conference Series: Materials Science and Engineering, vol. 329 (1). » in dettaglio Cadoni, E., Dotta, M.& Forni, D. (2018) Behaviour of UHPFRCs in compression under high stress-rates. EPJ Web Conf., vol. 183 pp.2005-2005. » in dettaglio Cadoni, E., Fontana, M., Forni, D.& Knobloch, M. (2018) High strain rates testing and constitutive modeling of B500B reinforcing steel at elevated temperatures. The European Physical Journal Special Topics, vol. 227 (1) pp.179-199. » in dettaglio Cadoni, E., Forni, D., Gieleta, R.& Kruszka, L. (2018) Tensile and compressive behaviour of S355 mild steel in a wide range of strain rates. The European Physical Journal Special Topics, vol. 227 (1) pp.29-43. » in dettaglio Coppola, L., Coffetti, D., Crotti, E., Forni, D.& Cadoni, E. (2018) Fiber reinforced mortars based on free Portland-CSA binders under high stress rate. EPJ Web Conf., vol. 183 pp.4013-4013. » in dettaglio Curosu, I., Mechtcherine, V., Forni, D.& Cadoni, E. (2018) Dynamic Tensile Behaviour of Strain-Hardening Cement-Based Composites (SHCC). EPJ Web Conf., vol. 183 pp.2015-2015. » in dettaglio Dobruský, S., Forni, D.& Cadoni, E. (2018) Response of UHPFRCs in Tension under High Stress Rate. EPJ Web Conf., vol. 183 pp.4003-4003. » in dettaglio Fenu, L., Aymerich, F., Francesconi, L., Forni, D., Tesio, N.& Cadoni, E. (2018) Dynamic behaviour of an earthen material under different impact loading conditions. EPJ Web Conf., vol. 183 pp.2014-2014. » in dettaglio Luccioni, B., Isla, F., Forni, D.& Cadoni, E. (2018) Modelling UHPFRC tension behavior under high strain rates. Cement and Concrete Composites, vol. 91 pp.209-220. » in dettaglio Cadoni, E., Dotta, M., Forni, D.& Kaufmann, H. (2017) Tensile behaviour of commercial alluminium alloys used in armour applications at high strain rate. Procedia Engineering, vol. 197 pp.168-175. » in dettaglio Curosu, I., Mechtcherine, V., Forni, D.& Cadoni, E. (2017) Performance of various strain-hardening cement-based composites (SHCC) subject to uniaxial impact tensile loading. Cement and Concrete Research, vol. 102 pp.16-28. » in dettaglio Forni, D., Chiaia, B.& Cadoni, E. (2017) Blast effects on steel columns under fire conditions. Journal of Constructional Steel Research, vol. 136 pp.1-10. » in dettaglio Mirone, G., Barbagallo, R.& Cadoni, E. (2017) Tensile Test of a HSLA Steel at High Strain Rates with Two Different SHTB Facilities. Procedia Engineering, vol. 197 pp.89-98. » in dettaglio Cadoni, E., Coque, H.& Hiermaier, S. (2016) Dynamic Behaviour of Materials at High Strain Rates: Experiment, Modelling and Simulation. The European Physical Journal Special Topics, vol. 225. » in dettaglio Cadoni, E., Dotta, M.& Forni, D. (2016) Tensile behaviour of reinforcing steels at high strain rate and high temperature. Key Engineering Materials, vol. 711 pp.791-798. » in dettaglio Cadoni, E., Dotta, M., Forni, D.& Kaufmann, H. (2016) Effects of strain rate on mechanical properties in tension of a commercial aluminium alloy used in armour applications. Procedia Structural Integrity, vol. 2 pp.986-993. » in dettaglio Cadoni, E.& Forni, D. (2016) Experimental analysis of the UHPFRCs behavior under tension at high stress rate. The European Physical Journal Special Topics, vol. 225 pp.1-12. » in dettaglio Cadoni, E., Singh, N., Forni, D., Singha, M.& Gupta, N. (2016) Strain rate effects on the mechanical behavior of two Dual Phase steels in tension. The European Physical Journal Special Topics, vol. 225 pp.1-12. » in dettaglio Fenu, L., Forni, D.& Cadoni, E. (2016) Dynamic behaviour of cement mortars reinforced with glass and basalt fibres. Composites Part B: Engineering, vol. 92 (5) pp.142-150. » in dettaglio Forni, D., Chiaia, B.& Cadoni, E. (2016) High strain rate response of S355 at high temperatures. Materials and Design, vol. 94 pp.467-478. » in dettaglio Forni, D., Chiaia, B.& Cadoni, E. (2016) Strain rate behaviour in tension of S355 steel: Base for progressive collapse analysis. Engineering Structures, vol. 119 pp.164-173. » in dettaglio Luccioni, B., Isla, F., Forni, D.& Cadoni, E. (2016) Modelado de Hormigones de Ultra Altas Prestaciones Reforzados con Fibras bajo Altas Velocidades de Deformación. Mecánica Computacional, vol. XXXIV pp.199-223. » in dettaglio Bragov, A., Konstantinov, A., Lomunov, A., Forni, D., Riganti, G.& Cadoni, E. (2015) High strain rate response of UHP(FR)C in compression. EPJ Web of Conferences, vol. 94. » in dettaglio Cadoni, E., Dotta, M., Forni, D.& Spaetig, P. (2015) Influence of the temperature on the tension behaviour of EUROFER97 alloy at high strain rate. EPJ Web of Conferences, vol. 94 pp.1022-1022. » in dettaglio Cadoni, E., Dotta, M., Forni, D.& Tesio, N. (2015) High strain rate behaviour in tension of steel B500A reinforcing bar. Materials and Structures, vol. 48 (6) pp.1803-1813. » in dettaglio Cadoni, E.& Forni, D. (2015) Strain rate effects on reinforcing steels in tension. European Journal de Physique WoC, vol. 94 (01004). » in dettaglio Caverzan, A., di Prisco, M.& Cadoni, E. (2015) Dynamic behaviour of HPFRCC: The influence of fibres dispersion. EPJ Web of Conferences, vol. 94 pp.1064-1064. » in dettaglio D'Aiuto, F., De Caro, D., Federici, C., Tedesco, M., Ziggiotti, A.& Cadoni, E. (2015) Application of the dynamic characterization of metals in automotive industry. EPJ Web of Conferences, vol. 94 pp.5002-5002. » in dettaglio Fenu, L., Forni, D.& Cadoni, E. (2015) Energy absorption at high strain rate of glass fiber reinforced mortars. EPJ Web of Conferences, vol. 94 pp.1030-1030. » in dettaglio Kruszka, L., Mocko, W., Fenu, L.& Cadoni, E. (2015) Comparative experimental study of dynamic compressive strength of mortar with glass and basalt fibres. EPJ Web of Conferences, vol. 94 pp.5008-5008. » in dettaglio Latella, C., Dotta, M., Forni, D., Tesio, N.& Cadoni, E. (2015) Influence of strain rate on the mechanical behaviour in tension of bovine cortical bone. EPJ Web of Conferences, vol. 94 pp.3001-3001. » in dettaglio Menna, C., Asprone, D., Forni, D., Roviello, G., Ricciotti, L., Ferone, C., Bozza, A., Prota, A.& Cadoni, E. (2015) Tensile behaviour of geopolymer-based materials under medium and high strain rates. EPJ Web of Conferences, vol. 94 pp.1034-1034. » in dettaglio Petrov, Y., Borodin, E., Cadoni, E.& Selyutina, N. (2015) Relaxation model for dynamic plastic deformation of materials. European Journal de Physic WoC, vol. 94 (04039). » in dettaglio Petrov, Y., Bragov, A., Evstifeev, A.& Cadoni, E. (2015) Structural-temporal approach for dynamic strength characterization of gabbro-diabase. EPJ Web of Conferences, vol. 94 pp.1042-1042. » in dettaglio Albertini, C., Cadoni, E.& Solomos, G. (2014) Advances in the Hopkinson bar testing of irradiated/non-irradiated nuclear materials and large specimens. Philosophical Transactions of the Royal Society A, vol. 372 (201301). » in dettaglio Asprone, D., Cadoni, E., Lucolano, F.& Prota, A. (2014) Analysis of the strain-rate behavior of a basalt fiber reinforced natural hydraulic mortar. Cement and Concrete Composites , vol. 53 (10) pp.52-58. » in dettaglio Grazka, M., Janiszewski, J., Kruszka, L., Cadoni, E., Forni, D.& Riganti, G. (2014) Identification Methods of Parameters for Johnson-Cook Constitutive Equation - Comparison. Applied Mechanics and Materials, vol. 566 pp.97-103. » in dettaglio Riganti, G.& Cadoni, E. (2014) Numerical simulation of the high strain-rate behaviour of quenched and self-tempered reinforcing steel in tension. Materials and Design, vol. 57 pp.156-167. » in dettaglio Singh, N., Cadoni, E., Singha, M.& Gupta, N. (2014) Quasi-static and dynamic tensile behavior of CP800 steel. Mechanics of Advanced Materials and Structures, vol. 21 (7) pp.531-537. » in dettaglio Cadoni, E., Dotta, M., Forni, D., Tesio, N.& Albertini, C. (2013) Mechanical behaviour of quenched and self-tempered reinforcing steel in tension under high strain rate. Materials and Design, vol. 49 (8) pp.657-666. » in dettaglio Cadoni, E., Solomos, G.& Albertini, C. (2013) Concrete behaviour in direct tension tests at high strain rates. Magazine of Concrete Research, vol. 65 (11) pp.660-672. » in dettaglio Caverzan, A., Cadoni, E.& di Prisco, M. (2013) Dynamic tensile behaviour of high performance fibre reinforced cementitious composites after high temperature exposure. Mechanics of Materials, vol. 59 pp.87-109. » in dettaglio Singh, N., Cadoni, E., Singha, M.& Gupta, N. (2013) Dynamic Tensile and Compressive Behaviors of Mild Steel at Wide Range of Strain Rates. Journal of Engineering Mechanics ASCE, vol. 139 (9) pp.1197-1206. » in dettaglio Singh, N., Singha, M., Cadoni, E.& Gupta, N. (2013) Dynamic characteristics of Aluminium alloys at wide range of strain rates. Proceedings of the Indian National Science Academy. Part A, Physical Sciences, vol. 79 (4) pp.587-595. » in dettaglio Cadoni, E., Bragov, A., Dotta, M., Forni, D., Konstantinov, A.& Lomunov, A. (2012) Mechanical characterization of rocks at high strain rate. EPJ Web of Conferences, vol. 26 pp.1021-1021. » in dettaglio Cadoni, E., Caverzan, A.& di Prisco, M. (2012) Dynamic behaviour of HPFRCC in tension. EPJ Web of Conferences, vol. 26 pp.1014-1014. » in dettaglio Cadoni, E., Dotta, M., Forni, D., Bianchi, S.& Kaufmann, H. (2012) Strain rate effects on mechanical properties in tension of aluminium alloys used in armour applications. EPJ Web of Conferences, vol. 26 pp.5004-5004. » in dettaglio Cadoni, E., Fenu, L.& Forni, D. (2012) Strain rate behaviour in tension of austenitic stainless steel used for reinforcing bars. Construction and Building Materials, vol. 35 (0) pp.399-407. » in dettaglio Cadoni, E., Singh, N., Singha, M.& Gupta, N. (2012) Strain rate behaviour of multi-phase and complex-phase steels for automotive applications. EPJ Web of Conferences, vol. 26 pp.5003-5003. » in dettaglio Caverzan, A., Cadoni, E.& di Prisco, M. (2012) Tensile behaviour of high performance fibre-reinforced cementitious composites at high strain rates. International Journal of Impact Engineering, vol. 45 pp.28-38. » in dettaglio Evstifeev, A., Cadoni, E.& Petrov, Y. (2012) Incubation time approach to rock dynamic strength characterization. EPJ Web of Conferences, vol. 26 pp.1041-1041. » in dettaglio Singh, N., Cadoni, E., Singha, M.& Gupta, N. (2012) Mechanical characterization of multi phase steel at different rates of loading. Materials Science Forum, vol. 710 pp.421-426. » in dettaglio Singh, N., Singha, M., Cadoni, E.& Gupta, N. (2012) Strain Rate Sensitivity of an Aluminium Alloy under Compressive Loads. Advanced Materials Research, vol. 548 pp.169-173. » in dettaglio Singh, N., Singha, M., Cadoni, E.& Gupta, N. (2012) Strain Rate Sensitivity of Die Steel under Compressive Loads. Advanced Materials Research, vol. 585 pp.412-416. » in dettaglio Asprone, D., Iucolano, F., Cadoni, E.& Prota, A. (2011) Analysis of the strain-rate beahavior of a basalt fiber reinforced mortar. Applied Mechanics and Materials, vol. 82 pp.196-201. » in dettaglio Bragov, A., Cadoni, E., Konstantinov, A.& Lomunov, A. (2011) Tension and compression behavior of pre-stressed steel strands at high strain rate. Applied Mechanics and Materials, vol. 82 pp.154-159. » in dettaglio Cadoni, E., Antonietti, S., Dotta, M.& Forni, D. (2011) Strain Rate Behaviour of three Rocks in Tension. Engineering Transactions, vol. 59 (3) pp.197-210. » in dettaglio Cadoni, E., Bragov, A., Dotta, M., Forni, D., Konstantinov, A., Lomunov, A.& Ripamonti, A. (2011) Mechanical Characterization of Steel for Fastening in a wide range of Strain Rate. Engineering Transactions, vol. 59 (2) pp.101-117. » in dettaglio Cadoni, E., Dotta, M., Forni, D.& Bianchi, S. (2011) Strain-rate effect on high strength alloys. Applied Mechanics and Materials, vol. 82 pp.124-129. » in dettaglio Cadoni, E., Dotta, M., Forni, D.& Spaetig, P. (2011) Strain-rate behavior in tension of the tempered martensitic reduced activation steel Eurofer97. Journal of Nuclear Materials, vol. 414 (3) pp.360-366. » in dettaglio Cadoni, E., Dotta, M., Forni, D.& Tesio, N. (2011) Dynamic behaviour of reinforcing steel bars in tension. Applied Mechanics and Materials, vol. 82 pp.86-91. » in dettaglio Caverzan, A., Cadoni, E.& di Prisco, M. (2011) Dynamic tensile behaviour of Self Compacting Steel Fibre Reinforced Concrete. Applied Mechanics and Materials, vol. 82 pp.220-225. » in dettaglio Coppola, L., Cadoni, E., Forni, D.& Buoso, A. (2011) Mechanical Characterization of Cement Composites Reinforced with Fiberglass, Carbon Nanotubes or Glass Reinforced Plastic (GRP) at High Strain Rates. Applied Mechanics and Materials, vol. 82 pp.190-195. » in dettaglio Singh, N., Cadoni, E., Singha, M.& Gupta, N. (2011) Dynamic tensile behavior of multi phase high yield strength steel. Materials & Design, vol. 32 (10) pp.5091-5098. » in dettaglio Singh, N., Cadoni, E., Singha, M.& Gupta, N. (2011) Mechanical Behavior of Advanced High Strength Steel at High Strain Rates. Applied Mechanics and Materials, vol. 82 pp.178-183. » in dettaglio Smirnov, I., Petrov, Y., Sudenkov, Y.& Cadoni, E. (2011) Threshold characteristics of short pulse loads causing fracture in concrete and rocks. Applied Mechanics and Materials, vol. 82 pp.106-111. » in dettaglio Cadoni, E. (2010) Dynamic Characterization of Orthogneiss Rock Subjected to Intermediate and High Strain Rate in Tension. Rock Mechanics and Rock Engineering, vol. 43 (6) pp.667-676. » in dettaglio Cadoni, E., Bragov, A., Caverzan, A., di Prisco, M., Konstantinov, A.& Lomunov, A. (2010) Mechanical Response of HPFRCC in Tension and Compression at High Strain Rate and High Temperature. Engineering Transactions, vol. 58 (3) pp.95-107. » in dettaglio Asprone, D., Cadoni, E.& Prota, A. (2009) Experimental Analysis on Tensile Dynamic Behavior of Existing Concrete under High Strain Rates. ACI Structural Journal, vol. 106 pp.106-113. » in dettaglio Asprone, D., Cadoni, E.& Prota, A. (2009) Tensile High Strain-Rate Behavior of Reinforcing Steel from an Existing Bridge. ACI Structural Journal, vol. 106 (4) pp.523-529. » in dettaglio Asprone, D., Cadoni, E., Prota, A.& Manfredi, G. (2009) Dynamic behavior of a Mediterranean natural stone under tensile loading. International Journal of Rock Mechanics and Mining Sciences, vol. 46 (3) pp.514-520. » in dettaglio Asprone, D., Cadoni, E., Prota, A.& Manfredi, G. (2009) Strain-Rate Sensitivity of a Pultruded E-Glass/Polyester Composite. ASCE - Journal of Composites for Construction, vol. 13 (6) pp.558-564. » in dettaglio Cadoni, E., Meda, A.& Plizzari, G. (2009) Tensile behaviour of FRC under high strain-rate. Materials and Structures, vol. 42 (9) pp.1283-1294. » in dettaglio Cadoni, E., Solomos, G.& Albertini, C. (2009) Mechanical characterisation of concrete in tension and compression at high strain rate using a modified Hopkinson bar. Magazine of Concrete Research, vol. 61 (3) pp.221-230. » in dettaglio Cadoni, E., Forni, D.& Botturi, L. (2008) Learning by Seeing: The TEMAS Multimedia Learning Objects for Civil Engineers. TechTrends, vol. Volume (5) pp.17-21. » in dettaglio Solomos, G., Berra, M.& Cadoni, E. (2007) Impact testing of anchors in concrete. Actes des journées scientifiques du LCPC, vol. 2 pp.1305-1312. » in dettaglio Cadoni, E., Albertini, C.& Solomos, G. (2006) Analysis of the concrete behaviour in tension at high strain-rate by a modified Hopkinson bar in support of impact resistant structural design. Journal de Physique IV, vol. 134 pp.647-652. » in dettaglio Cadoni, E., Labibes, K., Albertini, C., Berra, M.& Giangrasso, M. (2001) Strain-rate effect on the tensile behaviour of concrete at different relative humidity levels. Materials and Structures, vol. 34 (1) pp.21-26. » in dettaglio Cadoni, E., Labibes, K., Berra, M., Giangrasso, M.& Albertini, C. (2001) Influence of Aggregate Size on Strain-Rate Tensile Behavior of Concrete. ACI Materials Journal, vol. 98 (3) pp.220-223. » in dettaglio Cadoni, E., Labibes, K., Berra, M.& GIangrasso, C. (2000) High-strain-rate tensile behaviour of concrete. Magazine of Concrete Research, vol. 52 (5) pp.365-370. » in dettaglio Albertini, C., Cadoni, E.& Labibes, K. (1999) Study of the mechanical properties of plain concrete under dynamic loading. Experimental Mechanics, vol. 39 (2) pp.137-141. » in dettaglio Albertini, C., Cadoni, E.& Labibes, K. (1997) Impact Fracture Process and Mechanical Properties of Plain Concrete by Means of an Hopkinson Bar Bundle. Journal de Physique IV, vol. 07 (C3) pp.3-915. » in dettaglio Albertini, C., Cadoni, E.& Labibes, K. (1997) Precision Measurements of Vehicle Crashworthiness by Means of a Large Hopkinson Bar. Journal de Physique IV, vol. 07 pp.379-84. » in dettaglio Bocca, P.& Cadoni, E. (1995) Analisi del comportamento di ancoraggi nel calcestruzzo sollecitati a trazione e soggetti a fatica. Industria delle Costruzioni, vol. 281 pp.66-72. » in dettaglio

Articolo di un giornale/rivista 2 Elementi

Cadoni, E., Colombo, P.& Terminio, A. (1999) Il controllo di qualità del calcestruzzo strutturale garanzia della durabilità. Industria Italiana del Cemento. » in dettaglio Bocca, P.& Cadoni, E. (1997) Comportamento di ancoraggi nel calcestruzzo sotto carichi ripetuti. Industria Italiana del Cemento, 720, pp.324-329. » in dettaglio

Articolo in documento di una conferenza 44 Elementi

Cadoni, E., Dotta, M., Forni, D., Riganti, G.& Tesio, N. (2019) Dynamic Behaviour of UHPFRC Under High Strain-Rate.. In Modern Developments in Performance of Structures Under Extreme Loading. » in dettaglio Cadoni, E.& Forni, D. (2019) High strain-rate response of UHPFRC in support of impact resistant structural design. In 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures FraMCoS-X. » in dettaglio Farotti, E., Mancini, E., Sasso, M.& Cadoni, E. (2019) Mechanical Strength Assessment of a Techno-Polymer for Large-Scale Industry. In EXPANDING THE BOUNDARIES OF MECHANICS. » in dettaglio Forni, D., Chiaia, B.& Cadoni, E. (2019) Structural Robustness: The Role of the Mechanical Characterization of Materials Under Extreme Loadings.. In Modern Developments in Performance of Structures Under Extreme Loading. » in dettaglio Cadoni, E. (2017) Mechanical characterization of alloys in extreme conditions of high strain rates and high temperature. In Proceedings of European Material Research Society - 2017 Fall Meeting. » in dettaglio Cadoni, E., Dotta, M.& Forni, D. (2017) Analysis of the Materials Behaviour at High Strain-Rate in Support of Impact Resistant Structural Design., pp.809-819. » in dettaglio Cadoni, E., Dotta, M., Forni, D.& Albertini, C. (2017) Dynamic behaviour of UHPC in compression by means of 3D-Modified Hopkinson Bar. In Proceedings of 6th International Conference on Design and Analysis of Protective Structures (DAPS 2017), pp.61-66. » in dettaglio Dobruský, S., Forni, D.& Cadoni, E. (2017) Mechanical Characterization of UHPC at High Strain Rate., pp.107-112. » in dettaglio Forni, D., Chiaia, B.& Cadoni, E. (2017) Effetti cinbubati du akta temperatura ed esplosione nello studio dell'innesco del collasso progressivo di strutture metalliche. In Ingegneria forense, crolli affidabilità strutturale e consolidamento, pp.493-504. » in dettaglio Forni, D., Chiaia, B.& Cadoni, E. (2017) Effetti combinati di temperatura ed esplosione nello studio dell'innesco del collasso progressivo di strutture metalliche. In Ingegneria forense, crolli affidabilità strutturale e consolidamento, pp.493-504. » in dettaglio Cadoni, E. (2016) Mechanical characterization of high value alloys and metal-matrix composites (with and without CRM) under high strain rates and high temperature. » in dettaglio Cadoni, E., Dotta, M.& Forni, D. (2016) Effect of the high temperature on the high strain rate behaviour of an austenitic stainless steel. » in dettaglio Curosu, I., Mechtcherine, V., Forni, D.& Cadoni, E. (2016) Influence of fibre type on the tensile behaviour of strain-hardening cement-based composites (SHCC) under impact loading. » in dettaglio Fenu, L., Congiu, E., Forni, D., Tesio, N.& Cadoni, E. (2016) Comparison between the dynamic behaviour of cement mortars reinforced with glass and basalt fibres. » in dettaglio Forni, D., Chiaia, B.& Cadoni, E. (2016) Mechanical properties of S355 under extreme coupled effect of high temperatures and high strain rates. » in dettaglio Solomos, G., Cadoni, E.& Peroni, M. (2016) Dynamic testing of large concrete specimens with large modified Hopkinson bar apparatuses. » in dettaglio Cadoni, E. (2015) Protection of Infrastructure Elements from the effects of IEDs: the role of the mechanical characterization of materials at high strain rate. In 16th Intenational Symposium on the Interaction of Effects of Munitions with Structures. » in dettaglio Cadoni, E., Dotta, M., Forni, D., Riganti, G.& Albertini, C. (2015) First application of the 3D-MHB on dynamic compressive behavior of UHPC. In EPJ Web of Conferences , pp.1031-1031. » in dettaglio Cadoni, E., Dotta, M., Forni, D., Riganti, G.& Kaufmann, H. (2015) Experimental and numerical analysis of the dynamic behaviour in tension of an armour steel for applications in defence industry. In EPJ Web of Conferences , pp.5004-5004. » in dettaglio Riganti, G.& Cadoni, E. (2015) use of the Split Hopkinson Bar tests to assess the material models for concrete, The. In 16th International Symposium for the Interaction of the Effects of Munitions with Structures. » in dettaglio Cadoni, E. (2013) Fracture behaviour of concrete at high strain rate. In Fracture Mechanics of Concrete and Concrete Structures, pp.217-227. » in dettaglio Cadoni, E., Dotta, M., Forni, D., Riganti, G.& Tesio, N. (2013) Tensile behaviour at high strain rate of UHPFRC for protective structures. » in dettaglio di Prisco, M., Beltrami, C., Bonalumi, P., Cadoni, E., Caverzan, A., Colombo, M., Ferrara, L.& Martinelli, P. (2013) HPFRC tunnel segments to mitigate the risk of exceptional loads. In Engineering a Concrete Future: Technology, Modeling & Construction, pp.695-698. » in dettaglio Coppola, L., Cadoni, E., Forni, D.& Buoso, A. (2012) Caratterizzazione meccanica di compositi a base cementizia con fibre di vetro, di polipropilene rinforzato (GRP) e nanotubi di carbonio ad elevate velocità di deformazione. In Proceedings of XI Convegno Nazionale AIMAT, pp.157-160. » in dettaglio Singh, N., Cadoni, E., Singha, M.& Gupta, N. (2012) Dynamic compressive behavior of bearing steel. » in dettaglio Singh, N., Cadoni, E., Singha, M.& Gupta, N. (2012) Mechanical behavior of a structural steel at different rates of loading., pp.30-30. » in dettaglio Cadoni, E., Dotta, M., Forni, D.& Spätig, P. (2011) Mechanical characterization of EUROFER97 in tension at high strain rate. » in dettaglio Cadoni, E., Singh, N., Singha, M.& Gupta, N. (2011) High strain rate characterization of an advanced high strength steel. » in dettaglio Coppola, L., Cadoni, E., Forni, D.& Buoso, A. (2011) Performance of multi-scale fiber reinforced cement composites at high strain rate. In The new boundaries of structural concrete, pp.235-241. » in dettaglio Spaetig, P., Cadoni, E., Dotta, M.& Forni, D. (2011) Static and dynamic tensile behavior at room temperature of the high-chromium reduced activation tempered martensitic steel Eurofer97. In IEA Workshop on Fusion Materials Modeling . » in dettaglio Cadoni, E., Dotta, M., Forni, D.& Bianchi, S. (2010) Effects of strain rate on mechanical properties in tension of an aluminium alloy used in armour applications. » in dettaglio Caverzan, A., Cadoni, E., Colombo, M.& di Prisco, M. (2010) Comportamento dinamico ed alle alte temperature di compositi cementizi fibrorinforzati ad alte prestazioni. In Proceedings of 18° Congress C.T.E., pp.597-607. » in dettaglio Asprone, D., Cadoni, E., Prota, A.& Manfredi, G. (2009) Tensile dynamic behavior of gfrp subjected to controlled strain rates and aging conditions. » in dettaglio Cadoni, E., Asprone, D., Prota, A.& Manfredi, G. (2009) Material characterization at high strain-rate to design a controlled demolition of a bridge. In proceeding IF CRASC’09, 1st Congress on forensic engineering, 4th Congress on Collapses, Reliability and Retrofit of Structures, pp.397-406. DOPPIAVOCE. » in dettaglio Caverzan, A., Cadoni, E.& di Prisco, M. (2009) Behaviour of advanced cementitious composites under dynamic loading and fire. In Structures Response to Impact and Blast. » in dettaglio Amaro, W., Broggini, F., Cadoni, E., Diviani, L.& Pedretti, A. (2008) TSCB - Twin Shape Composed Beam. » in dettaglio Cadoni, E., Albertini, C.& Forni, D. (2008) Impact behaviour of materials: a tool for the de-sign of rockfall protective shelters. » in dettaglio Cadoni, E., Dotta, M., Forni, D., Albertini, C., D'Aiuto, F., Federici, C.& Maggi, S. (2008) Mechanical characterization of high strength steel at medium and high strain-rate as tool in impact structural assessment and design. In Impact Loading of Lightweight Structures. » in dettaglio Bernasconi, A., Cadoni, E., Chianese, D., Kaehr, P., Pahud, D.& Salvadori, D. (2005) Durability of flat roofs: practical experience on service life and consequences on the maintenance strategy., pp.7-235. » in dettaglio Cadoni, E., Solomos, G., Berra, M.& Albertini, C. (2005) High strain-rate behaviour of plain concrete subjected to tensile and compressive loading. In Construction Materials: Performances, Innovations and Structural implication. » in dettaglio Teruzzi, T., Cadoni, E.& Frigeri, G. (2005) Assessment of concrete structures durability by estimation of the residual service life. » in dettaglio Teruzzi, T., Cadoni, E., Frigeri, G., Cangiano, S.& Plizzari, G. (2004) Durability aspects of steel fibre reinforced concrete. In BEFIB 2004, pp.625-634. Rilem. » in dettaglio Teruzzi, T.& Cadoni, E. (2003) Application of a life-time management method on existing concrete structures of 25 scholastic facilities by probabilistic estimation of the residual service life. In Integrated Lifetime Engineering of Buildings and civil Infrastructures, pp.385-390. » in dettaglio Teruzzi, T., Cadoni, E.& Frigeri, G. (2003) Evaluation of the residual service life of existing concrete structures: a valuable tool for maintenance planning. In Life Prediction and Aging Management of Concrete Structures, pp.207-216. » in dettaglio

Capitolo di un libro 29 Elementi

Curosu, I., Mechtcherine, V., Forni, D.& Cadoni, E. 2017. Influence of Fiber Type on the Tensile Behavior of Strain-Hardening Cement-Based Composites (SHCC) Under Impact Loading. In Strain-Hardening Cement-Based Composites, pp.257-265. Springer. » in dettaglio Menna, C., Asprone, D.& Cadoni, E. 2017. Dynamic behavior. In Rock Mechanics and Engineering, Xia Ting Feng , vol. 2, pp.285-304. CRC Press. » in dettaglio Cadoni, E. 2011. Assessment of the structural materials under high stain-rate in tension. In Sustainability of Constructions: Integrated Approach to Life-Time Structural Engineering, pp.327-338. University of Malta. » in dettaglio Cadoni, E.& Albertini, C. 2011. Modified Hopkinson Bar Technologies Applied to the High Strain Rate of Rocks.. In Advances in Rock Dynamics and Applications, Zhou Yingxin ,Zhao Jian , pp.79-104. Taylor & Francis. » in dettaglio Caverzan, A., Cadoni, E.& di Prisco, M. 2011. Dynamic behavior of HPFRCC at high strain rate: the fiber role. In High Performance Fiber Reinforced Cement Composites, pp.339-346. RILEM. » in dettaglio Portioli, F., D'Aniello, M., Cadoni, E., Borg, R.& Hechler, O. 2011. Demolition and deconstruction of bridges. In Sustainability of Constructions: Integrated Approach to Life-time Structural Engineering , pp.377-390. University of Malta. » in dettaglio Cadoni, E., Caverzan, A.& di Prisco, M. 2010. Behaviour of High Performance Fibre Reinforced Cementitious Composites under high dynamic loading and fire for safe tunnels. In Urban Habitat Constructions under Catastrophic Events, vol. 933-93. Taylor & Francis Group. » in dettaglio Cadoni, E., Caverzan, A.& di Prisco, M. 2010. On the influence of high temperature on the dynamic behaviour of high performance fibre reinforced cementitious composites. In Concrete under severe conditions - Environment and Loading, vol. 2, pp.1331-1338. Taylor & Francis. » in dettaglio Cadoni, E., Dotta, M., Forni, D., Asprone, D., Prota, A.& Manfredi, G. 2010. Dynamic characterization of concrete and reinforcing steel for the demolition of a bridge. In Structural Concrete in Switzerland, vol. 3, pp.28-31. FIB-CH. » in dettaglio Cadoni, E., Dotta, M., Forni, D., Caverzan, A.& di Prisco, M. 2010. Advanced cementitious composites in the design and construction of safe tunnels. In Structural Concrete in Switzerland, vol. 3, pp.12-15. FIB-CH. » in dettaglio De Matteis, G., Cadoni, E.& Asprone, D. 2010. Analysis of behaviour of constructions under impact and explosions: approaches for structural analysis, from material modeling to structural response. In Urban Habitat Constructions under Catastrophic Events, pp.161-178. Taylor & Francis Group. » in dettaglio Cadoni, E., Albertini, C., Dotta, M., Forni, D., Giorgetti, P.& Riganti, G. 2009. Mechanical characterization of rocks at high strain-rate by the JRC modified Hopkinson bar: a tool in blast and impact assessment. In Rock fragmentation by blasting, vol. 1, pp.35-41. Taylor & Francis Group. » in dettaglio Cadoni, E., Asprone, D., Dotta, M., Forni, D., Prota, A.& Manfredi, G. 2009. Investigation on dynamic behavior of a mediterranean natural stone under tensile loading. In Structures under extreme loading. National Defence Academy - Japan. » in dettaglio Cadoni, E., Asprone, D., Prota, A.& Manfredi, G. 2009. Criteria for optimized design of demolition of a bridge: the Tenza bridge. In Sustainability of Constructions: Integrated Approach to Life-Time Structural Engineering, pp.211-216. University of Malta. » in dettaglio Cadoni, E., Asprone, D., Prota, A.& Manfredi, G. 2009. Dynamic tensile behavior of yellow tuff. In Mechanical and Physical Behaviour of Materials under Dynamic Loading, vol. 2, pp.1359-1365. EDP Sciences. » in dettaglio Cadoni, E., Caverzan, A.& di Prisco, M. 2009. Dynamic characterization of advanced cementitious composites in design and construction of safe tunnel. In Structures under extreme loading. National Defence Academy - Japan. » in dettaglio Cadoni, E., D'Aiuto, F.& Albertini, C. 2009. Dynamic behaviour of Advanced High Strength Steels used in the automobile structures. In Mechanical and Physical Behaviour of Materials under Dynamic Loading, vol. 1, pp.135-141. EDP Sciences. » in dettaglio Cadoni, E., Dotta, M., Forni, D., Meda, A.& Plizzari, G. 2009. Rate Effects of High Performance Fibre Reinforced Cementitius Composite under tensile loading. In Mechanical and Physical Behaviour of Materials under Dynamic Loading, vol. 1, pp.809-815. EDP Sciences. » in dettaglio Cadoni, E., Caverzan, A.& di Prisco, M. 2008. Dynamic behaviour of HPFR cementitious composites. In Ultra High Performance Concrete, Structural Materials and Engineering Series, vol. 10, pp.743-750. Kassel University Press. » in dettaglio Cadoni, E., Meda, A.& Plizzari, G. 2008. Rate sensitivity of HPFRCC under tensile loading: from quasi-static to high strain rates. In Fibre Reinforced Concrete: Design and Applications, vol. Rilem , pp.441-450. Rilem. » in dettaglio Cadoni, E., Asprone, D.& Prota, A. 2007. Dynamic behavior of concrete and steel belonging to the Tenza bridge. In Concrete under severe conditions, pp.1341-1348. ACTES DES JOURNÉES SCIENTIFIQUES DU LCPC. » in dettaglio Cadoni, E., Asprone, D.& Prota, A. 2007. High strain-rate testing analysis of concrete and steel for the assessment of the Tenza Bridge under blast loading. In New trends in fractures mechanics of concrete, pp.627-635. Balkema. » in dettaglio Cadoni, E., Asprone, D.& Prota, A. 2007. Structural assessment of the Tenza Bridge under extreme loads: the role of the material characterization at high strain-rate. In Performance, protection & strengthening of structures under extreme loading. UBC. » in dettaglio Cadoni, E., Dotta, M., Meda, A.& Plizzari, G. 2007. Analysis of Fiber Reinforced Concrete under impact loading. In Performance, protection & strengthening of structures under extreme loading. UBC. » in dettaglio Cadoni, E., Dotta, M., Meda, A.& Plizzari, G. 2007. Behaviour of polypropylene Fibre Reinforced Concrete under static and impact tensile loading. In Concrete under severe conditions, vol. 2, pp.1267-1274. Actes des journées scientifiques du LCPC. » in dettaglio Cadoni, E., Amaro, W., Dotta, M., Albertini, C.& Giorgetti, P. 2006. DynaMat: Laboratory for mechanical characterization of materials at high strain-rate. In Structural Concrete in Switzerland, vol. 2, pp.35-38. FIB-CH. » in dettaglio Cadoni, E., Cangiano, S., Frigeri, G., Plizzari, G.& Teruzzi, T. 2005. Durability and fracture behaviour of steel fibre reinforced concrete. In Construction Materials: Performances, Innovations and Structural implication. Taylor & Francis. » in dettaglio Cadoni, E., Cangiano, S., Frigeri, G., Plizzari, G.& Teruzzi, T. 2005. On durability of Steel Fibre Reinforced Concrete. In Construction Materials: Performances, Innovations and Structural implication, pp.477-486. Thomas Telford. » in dettaglio Cadoni, E., Teruzzi, T., Muttoni, A., Suter, R.& Brühwiler, E. 2004. FRC in Switzerland: research, applications and perspectives. In FRC: From theory to practice, pp.157-168. Starlink. » in dettaglio

Libro 6 Elementi

Forni, D., Chiaia, B.& Cadoni, E. (2016) effect of high strain rate on tensile properties of S355 steel at high temperature, The, Zingoni Alphose , Taylor & Francis Group, London. » in dettaglio Cadoni, E. (2015) On the mechanical characterization of materials for Protection of Infrastructure Elements from the effects of IEDs, Koduri V.H.R ,Banthia N.K. , DEStech. » in dettaglio Cadoni, E.& Forni, D. (2015) High strain rate behaviour in tension of different reinforcing steels, Kodur V.H.R ,Banthia N.K. , DEStech. » in dettaglio Cadoni, E. (2013) Mechanical characterization of rock materials at high strain-rate, Zhao Jian ,Li Jianchun , CRC Press. » in dettaglio Cadoni, E.& Kaufmann, H. (2012) Opportunities and Challenges of Light-Weight Armour: Failure Mechanisms, Materials, Experiments and Modeling, Cadoni Ezio , SUPSI. » in dettaglio Cadoni, E.& di Prisco, M. (2011) Performance, Protection and Strengthening of Structures under Extreme Loading, Trans Tech Publication. » in dettaglio

Presentazione ad una conferenza 3 Elementi

Cadoni, E.Experimental and numerical characterization of the mechanical behavior of ultra-high performance fibre-reinforced concrete under high loading rate. , DYNAMIC BEHAVIOR OF MATERIALS. EXPERIMENTAL TESTS AND MODELLING OF MATERIALS UNDER HIGH STRAIN RATES, 2016, S.M. Tucuman, Argentine. » in dettaglio Cadoni, E.Il comportamento dei conglomerati cementizi sollecitati ad alta velocità di deformazione. , Scuola di Perfezionamento e Specializzazione"Leganti, malte, calcestruzzi e materiali innovativi per costruire sostenibile", 2016, Naples, Italy. » in dettaglio Forni, D.& Cadoni, E.Experimental and numerical analysis of S355 steel under extreme coupled effect of high temperatures and high strain rates. , DYNAMIC BEHAVIOR OF MATERIALS. EXPERIMENTAL TESTS AND MODELLING OF MATERIALS UNDER HIGH STRAIN RATES, 2016, S.M. Tucuman, Argentine. » in dettaglio

Report 1 Elemento

Cadoni, E.& Forni, D. (2010) Mechanical behaviour of Basalt Fiber Reinforced Cementitius Composite under quasi static, medium and high strain rate. SUPSI. » in dettaglio

Progetti di cui è responsabile

Strain-Hardening Cement-based Composites » in dettaglio Study of polymeric materials under dynamic conditions for building applications. » in dettaglio High strain-rate behaviour of E01141325 material at high and room temperature » in dettaglio Mechanical behavior of UHPFRC under high loading rate (impact, explosion, earthquake, hurricane). » in dettaglio Verifiche sismiche e misure anti-sismiche per edifici in muratura » in dettaglio Behaviour of structural steels under fire in a wide range of strain rates » in dettaglio Dynamic fracture of rocks under high rate mechanical and electric breakdown induced loads » in dettaglio Construction materials under high strain rate » in dettaglio Split Hopkinson bar test on UHPFRC/HPC » in dettaglio Triaxially Compressed Hopkinson Bar (TriHB) for Geomaterial and Construction Material Testing » in dettaglio Experimental investigations of high rate fracture in concrete and rocks » in dettaglio Rate and scale effects in fracture of concrete and rocks » in dettaglio Teaching and Advanced Research on high strain rate behaviour of materials and testing » in dettaglio Basalt fibre reiforced mortars » in dettaglio Analysis on the tensile behaviour of the titanium alloys under high strain rate » in dettaglio Mechanical characterization of polymers used in automotive industry » in dettaglio Dynamic behaviour of alluminium and titanium alloys » in dettaglio Dynamic behaviour of materials for industrial applications » in dettaglio Experimental studies on tensile dynamic behaviour of advanced materials » in dettaglio Mechanical characterization of advanced materials under dynamic loads » in dettaglio Advanced Cementitious Composites In DEsign and coNstruction of safe Tunnel » in dettaglio Fusion Energy Materials Science - Coordination Action » in dettaglio Sistemi Integrati Test Dinamici » in dettaglio Security of Airport Structures » in dettaglio Mechanical Characterizastion of Mediterranean Yellow Tuff » in dettaglio Studio del comportamento dinamico di lamiere in acciaio per il settore automobilistico » in dettaglio Sustainability of Constructions: Integrated Approach to Life-time Structural Engineering » in dettaglio Tecniche sperimentali: materiali e strutture » in dettaglio Tenza Bridge Project » in dettaglio Laboratorio Interdipartimentale DynaMat » in dettaglio Analisi Edifici Scolastici » in dettaglio

Progetti di cui è membro

Twin Shape Composed Beam » in dettaglio Centro di competenza interdipartimentale DACD-DTI di caratterizzazione e simulazione meccanica dei m » in dettaglio

 
st.wwwsupsi@supsi.ch