New search


Search details

Name and Surname Ezio Cadoni

Position Department of Innovative Technologies, professore
Department for Environment Constructions and Design, professore

Email ezio.cadoni@supsi.ch

Office Trevano - Blocco C
Via Trevano, 6952 Canobbio

Internal telephone number +41586666377

vCard

Education and training MSc in Civil Engineering of the University of Cagliari, summa cum laude, in July 1990. PhD in Structural mechanics at the Politecnico di Torino, in 1994.

Work experience 1992 at the Dept. of Civil and Environmental Engineering of the University of Cincinnati (USA) as visiting researcher. 1994-1997, at the Joint Research Centre of the European Commission as Post-Doc fellow and as scientific officer. 1998-2001, R&D head of a consulting engineering company and its laboratory in Lugano.

Skills His teaching covers the fundamentals of structural mechanics (statics, theory of structures, masonry, and strength of materials). In research he concentrates on the dynamic behavior of materials, measurement by Electronic Speckle Pattern Interferometry, anchors, durability, impact behavior of structures. He chaired several sessions of international conferences and has been member of several technical committees. He is reviewer of International Journals. He is author of more than hundred papers in reviewed International journals and conferences.

Awards Expert evaluator for the European Commission Reviewer of International Journals Member of technical committees Chairman of session and Reviewer of International Conferences President of DYMAT (2015-2018) Member of the ISRM commission on Rock dynamics

Article in conference proceedings 42 Elements

Cadoni, E.& Forni, D. (2019) High strain-rate response of UHPFRC in support of impact resistant structural design. In 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures FraMCoS-X. » more details Farotti, E., Mancini, E., Sasso, M.& Cadoni, E. (2019) Mechanical Strength Assessment of a Techno-Polymer for Large-Scale Industry. In EXPANDING THE BOUNDARIES OF MECHANICS. » more details Cadoni, E. (2017) Mechanical characterization of alloys in extreme conditions of high strain rates and high temperature. In Proceedings of European Material Research Society - 2017 Fall Meeting. » more details Cadoni, E., Dotta, M.& Forni, D. (2017) Analysis of the Materials Behaviour at High Strain-Rate in Support of Impact Resistant Structural Design., pp.809-819. » more details Cadoni, E., Dotta, M., Forni, D.& Albertini, C. (2017) Dynamic behaviour of UHPC in compression by means of 3D-Modified Hopkinson Bar. In Proceedings of 6th International Conference on Design and Analysis of Protective Structures (DAPS 2017), pp.61-66. » more details Dobruský, S., Forni, D.& Cadoni, E. (2017) Mechanical Characterization of UHPC at High Strain Rate., pp.107-112. » more details Forni, D., Chiaia, B.& Cadoni, E. (2017) Effetti cinbubati du akta temperatura ed esplosione nello studio dell'innesco del collasso progressivo di strutture metalliche. In Ingegneria forense, crolli affidabilità strutturale e consolidamento, pp.493-504. » more details Forni, D., Chiaia, B.& Cadoni, E. (2017) Effetti combinati di temperatura ed esplosione nello studio dell'innesco del collasso progressivo di strutture metalliche. In Ingegneria forense, crolli affidabilità strutturale e consolidamento, pp.493-504. » more details Cadoni, E. (2016) Mechanical characterization of high value alloys and metal-matrix composites (with and without CRM) under high strain rates and high temperature. » more details Cadoni, E., Dotta, M.& Forni, D. (2016) Effect of the high temperature on the high strain rate behaviour of an austenitic stainless steel. » more details Curosu, I., Mechtcherine, V., Forni, D.& Cadoni, E. (2016) Influence of fibre type on the tensile behaviour of strain-hardening cement-based composites (SHCC) under impact loading. » more details Fenu, L., Congiu, E., Forni, D., Tesio, N.& Cadoni, E. (2016) Comparison between the dynamic behaviour of cement mortars reinforced with glass and basalt fibres. » more details Forni, D., Chiaia, B.& Cadoni, E. (2016) Mechanical properties of S355 under extreme coupled effect of high temperatures and high strain rates. » more details Solomos, G., Cadoni, E.& Peroni, M. (2016) Dynamic testing of large concrete specimens with large modified Hopkinson bar apparatuses. » more details Cadoni, E. (2015) Protection of Infrastructure Elements from the effects of IEDs: the role of the mechanical characterization of materials at high strain rate. In 16th Intenational Symposium on the Interaction of Effects of Munitions with Structures. » more details Cadoni, E., Dotta, M., Forni, D., Riganti, G.& Albertini, C. (2015) First application of the 3D-MHB on dynamic compressive behavior of UHPC. In EPJ Web of Conferences , pp.1031-1031. » more details Cadoni, E., Dotta, M., Forni, D., Riganti, G.& Kaufmann, H. (2015) Experimental and numerical analysis of the dynamic behaviour in tension of an armour steel for applications in defence industry. In EPJ Web of Conferences , pp.5004-5004. » more details Riganti, G.& Cadoni, E. (2015) use of the Split Hopkinson Bar tests to assess the material models for concrete, The. In 16th International Symposium for the Interaction of the Effects of Munitions with Structures. » more details Cadoni, E. (2013) Fracture behaviour of concrete at high strain rate. In Fracture Mechanics of Concrete and Concrete Structures, pp.217-227. » more details Cadoni, E., Dotta, M., Forni, D., Riganti, G.& Tesio, N. (2013) Tensile behaviour at high strain rate of UHPFRC for protective structures. » more details di Prisco, M., Beltrami, C., Bonalumi, P., Cadoni, E., Caverzan, A., Colombo, M., Ferrara, L.& Martinelli, P. (2013) HPFRC tunnel segments to mitigate the risk of exceptional loads. In Engineering a Concrete Future: Technology, Modeling & Construction, pp.695-698. » more details Coppola, L., Cadoni, E., Forni, D.& Buoso, A. (2012) Caratterizzazione meccanica di compositi a base cementizia con fibre di vetro, di polipropilene rinforzato (GRP) e nanotubi di carbonio ad elevate velocità di deformazione. In Proceedings of XI Convegno Nazionale AIMAT, pp.157-160. » more details Singh, N., Cadoni, E., Singha, M.& Gupta, N. (2012) Dynamic compressive behavior of bearing steel. » more details Singh, N., Cadoni, E., Singha, M.& Gupta, N. (2012) Mechanical behavior of a structural steel at different rates of loading., pp.30-30. » more details Cadoni, E., Dotta, M., Forni, D.& Spätig, P. (2011) Mechanical characterization of EUROFER97 in tension at high strain rate. » more details Cadoni, E., Singh, N., Singha, M.& Gupta, N. (2011) High strain rate characterization of an advanced high strength steel. » more details Coppola, L., Cadoni, E., Forni, D.& Buoso, A. (2011) Performance of multi-scale fiber reinforced cement composites at high strain rate. In The new boundaries of structural concrete, pp.235-241. » more details Spaetig, P., Cadoni, E., Dotta, M.& Forni, D. (2011) Static and dynamic tensile behavior at room temperature of the high-chromium reduced activation tempered martensitic steel Eurofer97. In IEA Workshop on Fusion Materials Modeling . » more details Cadoni, E., Dotta, M., Forni, D.& Bianchi, S. (2010) Effects of strain rate on mechanical properties in tension of an aluminium alloy used in armour applications. » more details Caverzan, A., Cadoni, E., Colombo, M.& di Prisco, M. (2010) Comportamento dinamico ed alle alte temperature di compositi cementizi fibrorinforzati ad alte prestazioni. In Proceedings of 18° Congress C.T.E., pp.597-607. » more details Asprone, D., Cadoni, E., Prota, A.& Manfredi, G. (2009) Tensile dynamic behavior of gfrp subjected to controlled strain rates and aging conditions. » more details Cadoni, E., Asprone, D., Prota, A.& Manfredi, G. (2009) Material characterization at high strain-rate to design a controlled demolition of a bridge. In proceeding IF CRASC’09, 1st Congress on forensic engineering, 4th Congress on Collapses, Reliability and Retrofit of Structures, pp.397-406. DOPPIAVOCE. » more details Caverzan, A., Cadoni, E.& di Prisco, M. (2009) Behaviour of advanced cementitious composites under dynamic loading and fire. In Structures Response to Impact and Blast. » more details Amaro, W., Broggini, F., Cadoni, E., Diviani, L.& Pedretti, A. (2008) TSCB - Twin Shape Composed Beam. » more details Cadoni, E., Albertini, C.& Forni, D. (2008) Impact behaviour of materials: a tool for the de-sign of rockfall protective shelters. » more details Cadoni, E., Dotta, M., Forni, D., Albertini, C., D'Aiuto, F., Federici, C.& Maggi, S. (2008) Mechanical characterization of high strength steel at medium and high strain-rate as tool in impact structural assessment and design. In Impact Loading of Lightweight Structures. » more details Bernasconi, A., Cadoni, E., Chianese, D., Kaehr, P., Pahud, D.& Salvadori, D. (2005) Durability of flat roofs: practical experience on service life and consequences on the maintenance strategy., pp.7-235. » more details Cadoni, E., Solomos, G., Berra, M.& Albertini, C. (2005) High strain-rate behaviour of plain concrete subjected to tensile and compressive loading. In Construction Materials: Performances, Innovations and Structural implication. » more details Teruzzi, T., Cadoni, E.& Frigeri, G. (2005) Assessment of concrete structures durability by estimation of the residual service life. » more details Teruzzi, T., Cadoni, E., Frigeri, G., Cangiano, S.& Plizzari, G. (2004) Durability aspects of steel fibre reinforced concrete. In BEFIB 2004, pp.625-634. Rilem. » more details Teruzzi, T.& Cadoni, E. (2003) Application of a life-time management method on existing concrete structures of 25 scholastic facilities by probabilistic estimation of the residual service life. In Integrated Lifetime Engineering of Buildings and civil Infrastructures, pp.385-390. » more details Teruzzi, T., Cadoni, E.& Frigeri, G. (2003) Evaluation of the residual service life of existing concrete structures: a valuable tool for maintenance planning. In Life Prediction and Aging Management of Concrete Structures, pp.207-216. » more details

Book 6 Elements

Forni, D., Chiaia, B.& Cadoni, E. (2016) effect of high strain rate on tensile properties of S355 steel at high temperature, The, Zingoni Alphose , Taylor & Francis Group, London. » more details Cadoni, E. (2015) On the mechanical characterization of materials for Protection of Infrastructure Elements from the effects of IEDs, Koduri V.H.R ,Banthia N.K. , DEStech. » more details Cadoni, E.& Forni, D. (2015) High strain rate behaviour in tension of different reinforcing steels, Kodur V.H.R ,Banthia N.K. , DEStech. » more details Cadoni, E. (2013) Mechanical characterization of rock materials at high strain-rate, Zhao Jian ,Li Jianchun , CRC Press. » more details Cadoni, E.& Kaufmann, H. (2012) Opportunities and Challenges of Light-Weight Armour: Failure Mechanisms, Materials, Experiments and Modeling, Cadoni Ezio , SUPSI. » more details Cadoni, E.& di Prisco, M. (2011) Performance, Protection and Strengthening of Structures under Extreme Loading, Trans Tech Publication. » more details

Chapter in book 29 Elements

Curosu, I., Mechtcherine, V., Forni, D.& Cadoni, E. 2017. Influence of Fiber Type on the Tensile Behavior of Strain-Hardening Cement-Based Composites (SHCC) Under Impact Loading. In Strain-Hardening Cement-Based Composites, pp.257-265. Springer. » more details Menna, C., Asprone, D.& Cadoni, E. 2017. Dynamic behavior. In Rock Mechanics and Engineering, Xia Ting Feng , vol. 2, pp.285-304. CRC Press. » more details Cadoni, E. 2011. Assessment of the structural materials under high stain-rate in tension. In Sustainability of Constructions: Integrated Approach to Life-Time Structural Engineering, pp.327-338. University of Malta. » more details Cadoni, E.& Albertini, C. 2011. Modified Hopkinson Bar Technologies Applied to the High Strain Rate of Rocks.. In Advances in Rock Dynamics and Applications, Zhou Yingxin ,Zhao Jian , pp.79-104. Taylor & Francis. » more details Caverzan, A., Cadoni, E.& di Prisco, M. 2011. Dynamic behavior of HPFRCC at high strain rate: the fiber role. In High Performance Fiber Reinforced Cement Composites, pp.339-346. RILEM. » more details Portioli, F., D'Aniello, M., Cadoni, E., Borg, R.& Hechler, O. 2011. Demolition and deconstruction of bridges. In Sustainability of Constructions: Integrated Approach to Life-time Structural Engineering , pp.377-390. University of Malta. » more details Cadoni, E., Caverzan, A.& di Prisco, M. 2010. Behaviour of High Performance Fibre Reinforced Cementitious Composites under high dynamic loading and fire for safe tunnels. In Urban Habitat Constructions under Catastrophic Events, vol. 933-93. Taylor & Francis Group. » more details Cadoni, E., Caverzan, A.& di Prisco, M. 2010. On the influence of high temperature on the dynamic behaviour of high performance fibre reinforced cementitious composites. In Concrete under severe conditions - Environment and Loading, vol. 2, pp.1331-1338. Taylor & Francis. » more details Cadoni, E., Dotta, M., Forni, D., Asprone, D., Prota, A.& Manfredi, G. 2010. Dynamic characterization of concrete and reinforcing steel for the demolition of a bridge. In Structural Concrete in Switzerland, vol. 3, pp.28-31. FIB-CH. » more details Cadoni, E., Dotta, M., Forni, D., Caverzan, A.& di Prisco, M. 2010. Advanced cementitious composites in the design and construction of safe tunnels. In Structural Concrete in Switzerland, vol. 3, pp.12-15. FIB-CH. » more details De Matteis, G., Cadoni, E.& Asprone, D. 2010. Analysis of behaviour of constructions under impact and explosions: approaches for structural analysis, from material modeling to structural response. In Urban Habitat Constructions under Catastrophic Events, pp.161-178. Taylor & Francis Group. » more details Cadoni, E., Albertini, C., Dotta, M., Forni, D., Giorgetti, P.& Riganti, G. 2009. Mechanical characterization of rocks at high strain-rate by the JRC modified Hopkinson bar: a tool in blast and impact assessment. In Rock fragmentation by blasting, vol. 1, pp.35-41. Taylor & Francis Group. » more details Cadoni, E., Asprone, D., Dotta, M., Forni, D., Prota, A.& Manfredi, G. 2009. Investigation on dynamic behavior of a mediterranean natural stone under tensile loading. In Structures under extreme loading. National Defence Academy - Japan. » more details Cadoni, E., Asprone, D., Prota, A.& Manfredi, G. 2009. Criteria for optimized design of demolition of a bridge: the Tenza bridge. In Sustainability of Constructions: Integrated Approach to Life-Time Structural Engineering, pp.211-216. University of Malta. » more details Cadoni, E., Asprone, D., Prota, A.& Manfredi, G. 2009. Dynamic tensile behavior of yellow tuff. In Mechanical and Physical Behaviour of Materials under Dynamic Loading, vol. 2, pp.1359-1365. EDP Sciences. » more details Cadoni, E., Caverzan, A.& di Prisco, M. 2009. Dynamic characterization of advanced cementitious composites in design and construction of safe tunnel. In Structures under extreme loading. National Defence Academy - Japan. » more details Cadoni, E., D'Aiuto, F.& Albertini, C. 2009. Dynamic behaviour of Advanced High Strength Steels used in the automobile structures. In Mechanical and Physical Behaviour of Materials under Dynamic Loading, vol. 1, pp.135-141. EDP Sciences. » more details Cadoni, E., Dotta, M., Forni, D., Meda, A.& Plizzari, G. 2009. Rate Effects of High Performance Fibre Reinforced Cementitius Composite under tensile loading. In Mechanical and Physical Behaviour of Materials under Dynamic Loading, vol. 1, pp.809-815. EDP Sciences. » more details Cadoni, E., Caverzan, A.& di Prisco, M. 2008. Dynamic behaviour of HPFR cementitious composites. In Ultra High Performance Concrete, Structural Materials and Engineering Series, vol. 10, pp.743-750. Kassel University Press. » more details Cadoni, E., Meda, A.& Plizzari, G. 2008. Rate sensitivity of HPFRCC under tensile loading: from quasi-static to high strain rates. In Fibre Reinforced Concrete: Design and Applications, vol. Rilem , pp.441-450. Rilem. » more details Cadoni, E., Asprone, D.& Prota, A. 2007. Dynamic behavior of concrete and steel belonging to the Tenza bridge. In Concrete under severe conditions, pp.1341-1348. ACTES DES JOURNÉES SCIENTIFIQUES DU LCPC. » more details Cadoni, E., Asprone, D.& Prota, A. 2007. High strain-rate testing analysis of concrete and steel for the assessment of the Tenza Bridge under blast loading. In New trends in fractures mechanics of concrete, pp.627-635. Balkema. » more details Cadoni, E., Asprone, D.& Prota, A. 2007. Structural assessment of the Tenza Bridge under extreme loads: the role of the material characterization at high strain-rate. In Performance, protection & strengthening of structures under extreme loading. UBC. » more details Cadoni, E., Dotta, M., Meda, A.& Plizzari, G. 2007. Analysis of Fiber Reinforced Concrete under impact loading. In Performance, protection & strengthening of structures under extreme loading. UBC. » more details Cadoni, E., Dotta, M., Meda, A.& Plizzari, G. 2007. Behaviour of polypropylene Fibre Reinforced Concrete under static and impact tensile loading. In Concrete under severe conditions, vol. 2, pp.1267-1274. Actes des journées scientifiques du LCPC. » more details Cadoni, E., Amaro, W., Dotta, M., Albertini, C.& Giorgetti, P. 2006. DynaMat: Laboratory for mechanical characterization of materials at high strain-rate. In Structural Concrete in Switzerland, vol. 2, pp.35-38. FIB-CH. » more details Cadoni, E., Cangiano, S., Frigeri, G., Plizzari, G.& Teruzzi, T. 2005. Durability and fracture behaviour of steel fibre reinforced concrete. In Construction Materials: Performances, Innovations and Structural implication. Taylor & Francis. » more details Cadoni, E., Cangiano, S., Frigeri, G., Plizzari, G.& Teruzzi, T. 2005. On durability of Steel Fibre Reinforced Concrete. In Construction Materials: Performances, Innovations and Structural implication, pp.477-486. Thomas Telford. » more details Cadoni, E., Teruzzi, T., Muttoni, A., Suter, R.& Brühwiler, E. 2004. FRC in Switzerland: research, applications and perspectives. In FRC: From theory to practice, pp.157-168. Starlink. » more details

Newspaper/Magazine article 2 Elements

Cadoni, E., Colombo, P.& Terminio, A. (1999) Il controllo di qualità del calcestruzzo strutturale garanzia della durabilità. Industria Italiana del Cemento. » more details Bocca, P.& Cadoni, E. (1997) Comportamento di ancoraggi nel calcestruzzo sotto carichi ripetuti. Industria Italiana del Cemento, 720, pp.324-329. » more details

Presentation at a conference 3 Elements

Cadoni, E.Experimental and numerical characterization of the mechanical behavior of ultra-high performance fibre-reinforced concrete under high loading rate. , DYNAMIC BEHAVIOR OF MATERIALS. EXPERIMENTAL TESTS AND MODELLING OF MATERIALS UNDER HIGH STRAIN RATES, 2016, S.M. Tucuman, Argentine. » more details Cadoni, E.Il comportamento dei conglomerati cementizi sollecitati ad alta velocità di deformazione. , Scuola di Perfezionamento e Specializzazione"Leganti, malte, calcestruzzi e materiali innovativi per costruire sostenibile", 2016, Naples, Italy. » more details Forni, D.& Cadoni, E.Experimental and numerical analysis of S355 steel under extreme coupled effect of high temperatures and high strain rates. , DYNAMIC BEHAVIOR OF MATERIALS. EXPERIMENTAL TESTS AND MODELLING OF MATERIALS UNDER HIGH STRAIN RATES, 2016, S.M. Tucuman, Argentine. » more details

Report 1 Element

Cadoni, E.& Forni, D. (2010) Mechanical behaviour of Basalt Fiber Reinforced Cementitius Composite under quasi static, medium and high strain rate. SUPSI. » more details

Scientific journal article 88 Elements

Cadoni, E.& Forni, D. (2019) Austenitic Stainless Steel Under Extreme Combined Conditions of Loading and Temperature. Journal of Dynamic Behavior of Materials. » more details Cadoni, E., Forni, D., Bonnet, E.& Svatopluk Dubrusky, S. (2019) Experimental study on direct tensile behaviour of UHPFRC under high strain-rates. Construction and Building Materials, vol. 218 pp.667-680. » more details Bazaud, E., Cosculluela, A., Couque, H.& Cadoni, E. (2018) Advances in the characterization, modelling and simulation of materials subjected to dynamic loading. The European Physical Journal Special Topics, vol. 227 (1) pp.1-2. » more details Cadoni, E. (2018) Foreword. EPJ Web Conf., vol. 183 pp.1-1. » more details Cadoni, E. (2018) Mechanical characterization of alloys in extreme conditions of high strain rates and high temperature. IOP Conference Series: Materials Science and Engineering, vol. 329 (1). » more details Cadoni, E., Dotta, M.& Forni, D. (2018) Behaviour of UHPFRCs in compression under high stress-rates. EPJ Web Conf., vol. 183 pp.2005-2005. » more details Cadoni, E., Fontana, M., Forni, D.& Knobloch, M. (2018) High strain rates testing and constitutive modeling of B500B reinforcing steel at elevated temperatures. The European Physical Journal Special Topics, vol. 227 (1) pp.179-199. » more details Cadoni, E., Forni, D., Gieleta, R.& Kruszka, L. (2018) Tensile and compressive behaviour of S355 mild steel in a wide range of strain rates. The European Physical Journal Special Topics, vol. 227 (1) pp.29-43. » more details Coppola, L., Coffetti, D., Crotti, E., Forni, D.& Cadoni, E. (2018) Fiber reinforced mortars based on free Portland-CSA binders under high stress rate. EPJ Web Conf., vol. 183 pp.4013-4013. » more details Curosu, I., Mechtcherine, V., Forni, D.& Cadoni, E. (2018) Dynamic Tensile Behaviour of Strain-Hardening Cement-Based Composites (SHCC). EPJ Web Conf., vol. 183 pp.2015-2015. » more details Dobruský, S., Forni, D.& Cadoni, E. (2018) Response of UHPFRCs in Tension under High Stress Rate. EPJ Web Conf., vol. 183 pp.4003-4003. » more details Fenu, L., Aymerich, F., Francesconi, L., Forni, D., Tesio, N.& Cadoni, E. (2018) Dynamic behaviour of an earthen material under different impact loading conditions. EPJ Web Conf., vol. 183 pp.2014-2014. » more details Luccioni, B., Isla, F., Forni, D.& Cadoni, E. (2018) Modelling UHPFRC tension behavior under high strain rates. Cement and Concrete Composites, vol. 91 pp.209-220. » more details Cadoni, E., Dotta, M., Forni, D.& Kaufmann, H. (2017) Tensile behaviour of commercial alluminium alloys used in armour applications at high strain rate. Procedia Engineering, vol. 197 pp.168-175. » more details Curosu, I., Mechtcherine, V., Forni, D.& Cadoni, E. (2017) Performance of various strain-hardening cement-based composites (SHCC) subject to uniaxial impact tensile loading. Cement and Concrete Research, vol. 102 pp.16-28. » more details Forni, D., Chiaia, B.& Cadoni, E. (2017) Blast effects on steel columns under fire conditions. Journal of Constructional Steel Research, vol. 136 pp.1-10. » more details Mirone, G., Barbagallo, R.& Cadoni, E. (2017) Tensile Test of a HSLA Steel at High Strain Rates with Two Different SHTB Facilities. Procedia Engineering, vol. 197 pp.89-98. » more details Cadoni, E., Coque, H.& Hiermaier, S. (2016) Dynamic Behaviour of Materials at High Strain Rates: Experiment, Modelling and Simulation. The European Physical Journal Special Topics, vol. 225. » more details Cadoni, E., Dotta, M.& Forni, D. (2016) Tensile behaviour of reinforcing steels at high strain rate and high temperature. Key Engineering Materials, vol. 711 pp.791-798. » more details Cadoni, E., Dotta, M., Forni, D.& Kaufmann, H. (2016) Effects of strain rate on mechanical properties in tension of a commercial aluminium alloy used in armour applications. Procedia Structural Integrity, vol. 2 pp.986-993. » more details Cadoni, E.& Forni, D. (2016) Experimental analysis of the UHPFRCs behavior under tension at high stress rate. The European Physical Journal Special Topics, vol. 225 pp.1-12. » more details Cadoni, E., Singh, N., Forni, D., Singha, M.& Gupta, N. (2016) Strain rate effects on the mechanical behavior of two Dual Phase steels in tension. The European Physical Journal Special Topics, vol. 225 pp.1-12. » more details Fenu, L., Forni, D.& Cadoni, E. (2016) Dynamic behaviour of cement mortars reinforced with glass and basalt fibres. Composites Part B: Engineering, vol. 92 (5) pp.142-150. » more details Forni, D., Chiaia, B.& Cadoni, E. (2016) High strain rate response of S355 at high temperatures. Materials and Design, vol. 94 pp.467-478. » more details Forni, D., Chiaia, B.& Cadoni, E. (2016) Strain rate behaviour in tension of S355 steel: Base for progressive collapse analysis. Engineering Structures, vol. 119 pp.164-173. » more details Luccioni, B., Isla, F., Forni, D.& Cadoni, E. (2016) Modelado de Hormigones de Ultra Altas Prestaciones Reforzados con Fibras bajo Altas Velocidades de Deformación. Mecánica Computacional, vol. XXXIV pp.199-223. » more details Bragov, A., Konstantinov, A., Lomunov, A., Forni, D., Riganti, G.& Cadoni, E. (2015) High strain rate response of UHP(FR)C in compression. EPJ Web of Conferences, vol. 94. » more details Cadoni, E., Dotta, M., Forni, D.& Spaetig, P. (2015) Influence of the temperature on the tension behaviour of EUROFER97 alloy at high strain rate. EPJ Web of Conferences, vol. 94 pp.1022-1022. » more details Cadoni, E., Dotta, M., Forni, D.& Tesio, N. (2015) High strain rate behaviour in tension of steel B500A reinforcing bar. Materials and Structures, vol. 48 (6) pp.1803-1813. » more details Cadoni, E.& Forni, D. (2015) Strain rate effects on reinforcing steels in tension. European Journal de Physique WoC, vol. 94 (01004). » more details Caverzan, A., di Prisco, M.& Cadoni, E. (2015) Dynamic behaviour of HPFRCC: The influence of fibres dispersion. EPJ Web of Conferences, vol. 94 pp.1064-1064. » more details D'Aiuto, F., De Caro, D., Federici, C., Tedesco, M., Ziggiotti, A.& Cadoni, E. (2015) Application of the dynamic characterization of metals in automotive industry. EPJ Web of Conferences, vol. 94 pp.5002-5002. » more details Fenu, L., Forni, D.& Cadoni, E. (2015) Energy absorption at high strain rate of glass fiber reinforced mortars. EPJ Web of Conferences, vol. 94 pp.1030-1030. » more details Kruszka, L., Mocko, W., Fenu, L.& Cadoni, E. (2015) Comparative experimental study of dynamic compressive strength of mortar with glass and basalt fibres. EPJ Web of Conferences, vol. 94 pp.5008-5008. » more details Latella, C., Dotta, M., Forni, D., Tesio, N.& Cadoni, E. (2015) Influence of strain rate on the mechanical behaviour in tension of bovine cortical bone. EPJ Web of Conferences, vol. 94 pp.3001-3001. » more details Menna, C., Asprone, D., Forni, D., Roviello, G., Ricciotti, L., Ferone, C., Bozza, A., Prota, A.& Cadoni, E. (2015) Tensile behaviour of geopolymer-based materials under medium and high strain rates. EPJ Web of Conferences, vol. 94 pp.1034-1034. » more details Petrov, Y., Borodin, E., Cadoni, E.& Selyutina, N. (2015) Relaxation model for dynamic plastic deformation of materials. European Journal de Physic WoC, vol. 94 (04039). » more details Petrov, Y., Bragov, A., Evstifeev, A.& Cadoni, E. (2015) Structural-temporal approach for dynamic strength characterization of gabbro-diabase. EPJ Web of Conferences, vol. 94 pp.1042-1042. » more details Albertini, C., Cadoni, E.& Solomos, G. (2014) Advances in the Hopkinson bar testing of irradiated/non-irradiated nuclear materials and large specimens. Philosophical Transactions of the Royal Society A, vol. 372 (201301). » more details Asprone, D., Cadoni, E., Lucolano, F.& Prota, A. (2014) Analysis of the strain-rate behavior of a basalt fiber reinforced natural hydraulic mortar. Cement and Concrete Composites , vol. 53 (10) pp.52-58. » more details Grazka, M., Janiszewski, J., Kruszka, L., Cadoni, E., Forni, D.& Riganti, G. (2014) Identification Methods of Parameters for Johnson-Cook Constitutive Equation - Comparison. Applied Mechanics and Materials, vol. 566 pp.97-103. » more details Riganti, G.& Cadoni, E. (2014) Numerical simulation of the high strain-rate behaviour of quenched and self-tempered reinforcing steel in tension. Materials and Design, vol. 57 pp.156-167. » more details Singh, N., Cadoni, E., Singha, M.& Gupta, N. (2014) Quasi-static and dynamic tensile behavior of CP800 steel. Mechanics of Advanced Materials and Structures, vol. 21 (7) pp.531-537. » more details Cadoni, E., Dotta, M., Forni, D., Tesio, N.& Albertini, C. (2013) Mechanical behaviour of quenched and self-tempered reinforcing steel in tension under high strain rate. Materials and Design, vol. 49 (8) pp.657-666. » more details Cadoni, E., Solomos, G.& Albertini, C. (2013) Concrete behaviour in direct tension tests at high strain rates. Magazine of Concrete Research, vol. 65 (11) pp.660-672. » more details Caverzan, A., Cadoni, E.& di Prisco, M. (2013) Dynamic tensile behaviour of high performance fibre reinforced cementitious composites after high temperature exposure. Mechanics of Materials, vol. 59 pp.87-109. » more details Singh, N., Cadoni, E., Singha, M.& Gupta, N. (2013) Dynamic Tensile and Compressive Behaviors of Mild Steel at Wide Range of Strain Rates. Journal of Engineering Mechanics ASCE, vol. 139 (9) pp.1197-1206. » more details Singh, N., Singha, M., Cadoni, E.& Gupta, N. (2013) Dynamic characteristics of Aluminium alloys at wide range of strain rates. Proceedings of the Indian National Science Academy. Part A, Physical Sciences, vol. 79 (4) pp.587-595. » more details Cadoni, E., Bragov, A., Dotta, M., Forni, D., Konstantinov, A.& Lomunov, A. (2012) Mechanical characterization of rocks at high strain rate. EPJ Web of Conferences, vol. 26 pp.1021-1021. » more details Cadoni, E., Caverzan, A.& di Prisco, M. (2012) Dynamic behaviour of HPFRCC in tension. EPJ Web of Conferences, vol. 26 pp.1014-1014. » more details Cadoni, E., Dotta, M., Forni, D., Bianchi, S.& Kaufmann, H. (2012) Strain rate effects on mechanical properties in tension of aluminium alloys used in armour applications. EPJ Web of Conferences, vol. 26 pp.5004-5004. » more details Cadoni, E., Fenu, L.& Forni, D. (2012) Strain rate behaviour in tension of austenitic stainless steel used for reinforcing bars. Construction and Building Materials, vol. 35 (0) pp.399-407. » more details Cadoni, E., Singh, N., Singha, M.& Gupta, N. (2012) Strain rate behaviour of multi-phase and complex-phase steels for automotive applications. EPJ Web of Conferences, vol. 26 pp.5003-5003. » more details Caverzan, A., Cadoni, E.& di Prisco, M. (2012) Tensile behaviour of high performance fibre-reinforced cementitious composites at high strain rates. International Journal of Impact Engineering, vol. 45 pp.28-38. » more details Evstifeev, A., Cadoni, E.& Petrov, Y. (2012) Incubation time approach to rock dynamic strength characterization. EPJ Web of Conferences, vol. 26 pp.1041-1041. » more details Singh, N., Cadoni, E., Singha, M.& Gupta, N. (2012) Mechanical characterization of multi phase steel at different rates of loading. Materials Science Forum, vol. 710 pp.421-426. » more details Singh, N., Singha, M., Cadoni, E.& Gupta, N. (2012) Strain Rate Sensitivity of an Aluminium Alloy under Compressive Loads. Advanced Materials Research, vol. 548 pp.169-173. » more details Singh, N., Singha, M., Cadoni, E.& Gupta, N. (2012) Strain Rate Sensitivity of Die Steel under Compressive Loads. Advanced Materials Research, vol. 585 pp.412-416. » more details Asprone, D., Iucolano, F., Cadoni, E.& Prota, A. (2011) Analysis of the strain-rate beahavior of a basalt fiber reinforced mortar. Applied Mechanics and Materials, vol. 82 pp.196-201. » more details Bragov, A., Cadoni, E., Konstantinov, A.& Lomunov, A. (2011) Tension and compression behavior of pre-stressed steel strands at high strain rate. Applied Mechanics and Materials, vol. 82 pp.154-159. » more details Cadoni, E., Antonietti, S., Dotta, M.& Forni, D. (2011) Strain Rate Behaviour of three Rocks in Tension. Engineering Transactions, vol. 59 (3) pp.197-210. » more details Cadoni, E., Bragov, A., Dotta, M., Forni, D., Konstantinov, A., Lomunov, A.& Ripamonti, A. (2011) Mechanical Characterization of Steel for Fastening in a wide range of Strain Rate. Engineering Transactions, vol. 59 (2) pp.101-117. » more details Cadoni, E., Dotta, M., Forni, D.& Bianchi, S. (2011) Strain-rate effect on high strength alloys. Applied Mechanics and Materials, vol. 82 pp.124-129. » more details Cadoni, E., Dotta, M., Forni, D.& Spaetig, P. (2011) Strain-rate behavior in tension of the tempered martensitic reduced activation steel Eurofer97. Journal of Nuclear Materials, vol. 414 (3) pp.360-366. » more details Cadoni, E., Dotta, M., Forni, D.& Tesio, N. (2011) Dynamic behaviour of reinforcing steel bars in tension. Applied Mechanics and Materials, vol. 82 pp.86-91. » more details Caverzan, A., Cadoni, E.& di Prisco, M. (2011) Dynamic tensile behaviour of Self Compacting Steel Fibre Reinforced Concrete. Applied Mechanics and Materials, vol. 82 pp.220-225. » more details Coppola, L., Cadoni, E., Forni, D.& Buoso, A. (2011) Mechanical Characterization of Cement Composites Reinforced with Fiberglass, Carbon Nanotubes or Glass Reinforced Plastic (GRP) at High Strain Rates. Applied Mechanics and Materials, vol. 82 pp.190-195. » more details Singh, N., Cadoni, E., Singha, M.& Gupta, N. (2011) Dynamic tensile behavior of multi phase high yield strength steel. Materials & Design, vol. 32 (10) pp.5091-5098. » more details Singh, N., Cadoni, E., Singha, M.& Gupta, N. (2011) Mechanical Behavior of Advanced High Strength Steel at High Strain Rates. Applied Mechanics and Materials, vol. 82 pp.178-183. » more details Smirnov, I., Petrov, Y., Sudenkov, Y.& Cadoni, E. (2011) Threshold characteristics of short pulse loads causing fracture in concrete and rocks. Applied Mechanics and Materials, vol. 82 pp.106-111. » more details Cadoni, E. (2010) Dynamic Characterization of Orthogneiss Rock Subjected to Intermediate and High Strain Rate in Tension. Rock Mechanics and Rock Engineering, vol. 43 (6) pp.667-676. » more details Cadoni, E., Bragov, A., Caverzan, A., di Prisco, M., Konstantinov, A.& Lomunov, A. (2010) Mechanical Response of HPFRCC in Tension and Compression at High Strain Rate and High Temperature. Engineering Transactions, vol. 58 (3) pp.95-107. » more details Asprone, D., Cadoni, E.& Prota, A. (2009) Experimental Analysis on Tensile Dynamic Behavior of Existing Concrete under High Strain Rates. ACI Structural Journal, vol. 106 pp.106-113. » more details Asprone, D., Cadoni, E.& Prota, A. (2009) Tensile High Strain-Rate Behavior of Reinforcing Steel from an Existing Bridge. ACI Structural Journal, vol. 106 (4) pp.523-529. » more details Asprone, D., Cadoni, E., Prota, A.& Manfredi, G. (2009) Dynamic behavior of a Mediterranean natural stone under tensile loading. International Journal of Rock Mechanics and Mining Sciences, vol. 46 (3) pp.514-520. » more details Asprone, D., Cadoni, E., Prota, A.& Manfredi, G. (2009) Strain-Rate Sensitivity of a Pultruded E-Glass/Polyester Composite. ASCE - Journal of Composites for Construction, vol. 13 (6) pp.558-564. » more details Cadoni, E., Meda, A.& Plizzari, G. (2009) Tensile behaviour of FRC under high strain-rate. Materials and Structures, vol. 42 (9) pp.1283-1294. » more details Cadoni, E., Solomos, G.& Albertini, C. (2009) Mechanical characterisation of concrete in tension and compression at high strain rate using a modified Hopkinson bar. Magazine of Concrete Research, vol. 61 (3) pp.221-230. » more details Cadoni, E., Forni, D.& Botturi, L. (2008) Learning by Seeing: The TEMAS Multimedia Learning Objects for Civil Engineers. TechTrends, vol. Volume (5) pp.17-21. » more details Solomos, G., Berra, M.& Cadoni, E. (2007) Impact testing of anchors in concrete. Actes des journées scientifiques du LCPC, vol. 2 pp.1305-1312. » more details Cadoni, E., Albertini, C.& Solomos, G. (2006) Analysis of the concrete behaviour in tension at high strain-rate by a modified Hopkinson bar in support of impact resistant structural design. Journal de Physique IV, vol. 134 pp.647-652. » more details Cadoni, E., Labibes, K., Albertini, C., Berra, M.& Giangrasso, M. (2001) Strain-rate effect on the tensile behaviour of concrete at different relative humidity levels. Materials and Structures, vol. 34 (1) pp.21-26. » more details Cadoni, E., Labibes, K., Berra, M., Giangrasso, M.& Albertini, C. (2001) Influence of Aggregate Size on Strain-Rate Tensile Behavior of Concrete. ACI Materials Journal, vol. 98 (3) pp.220-223. » more details Cadoni, E., Labibes, K., Berra, M.& GIangrasso, C. (2000) High-strain-rate tensile behaviour of concrete. Magazine of Concrete Research, vol. 52 (5) pp.365-370. » more details Albertini, C., Cadoni, E.& Labibes, K. (1999) Study of the mechanical properties of plain concrete under dynamic loading. Experimental Mechanics, vol. 39 (2) pp.137-141. » more details Albertini, C., Cadoni, E.& Labibes, K. (1997) Impact Fracture Process and Mechanical Properties of Plain Concrete by Means of an Hopkinson Bar Bundle. Journal de Physique IV, vol. 07 (C3) pp.3-915. » more details Albertini, C., Cadoni, E.& Labibes, K. (1997) Precision Measurements of Vehicle Crashworthiness by Means of a Large Hopkinson Bar. Journal de Physique IV, vol. 07 pp.379-84. » more details Bocca, P.& Cadoni, E. (1995) Analisi del comportamento di ancoraggi nel calcestruzzo sollecitati a trazione e soggetti a fatica. Industria delle Costruzioni, vol. 281 pp.66-72. » more details

In charge of the following projects

Strain-Hardening Cement-based Composites » more details Study of polymeric materials under dynamic conditions for building applications. » more details High strain-rate behaviour of E01141325 material at high and room temperature » more details Mechanical behavior of UHPFRC under high loading rate (impact, explosion, earthquake, hurricane). » more details Verifiche sismiche e misure anti-sismiche per edifici in muratura » more details Behaviour of structural steels under fire in a wide range of strain rates » more details Dynamic fracture of rocks under high rate mechanical and electric breakdown induced loads » more details Construction materials under high strain rate » more details Split Hopkinson bar test on UHPFRC/HPC » more details Triaxially Compressed Hopkinson Bar (TriHB) for Geomaterial and Construction Material Testing » more details Experimental investigations of high rate fracture in concrete and rocks » more details Rate and scale effects in fracture of concrete and rocks » more details Teaching and Advanced Research on high strain rate behaviour of materials and testing » more details Basalt fibre reiforced mortars » more details Analysis on the tensile behaviour of the titanium alloys under high strain rate » more details Mechanical characterization of polymers used in automotive industry » more details Dynamic behaviour of alluminium and titanium alloys » more details Dynamic behaviour of materials for industrial applications » more details Experimental studies on tensile dynamic behaviour of advanced materials » more details Mechanical characterization of advanced materials under dynamic loads » more details Advanced Cementitious Composites In DEsign and coNstruction of safe Tunnel » more details Fusion Energy Materials Science - Coordination Action » more details Sistemi Integrati Test Dinamici » more details Security of Airport Structures » more details Mechanical Characterizastion of Mediterranean Yellow Tuff » more details Studio del comportamento dinamico di lamiere in acciaio per il settore automobilistico » more details Sustainability of Constructions: Integrated Approach to Life-time Structural Engineering » more details Tecniche sperimentali: materiali e strutture » more details Tenza Bridge Project » more details Laboratorio Interdipartimentale DynaMat » more details Analisi Edifici Scolastici » more details

Member of the following projects

Twin Shape Composed Beam » more details Centro di competenza interdipartimentale DACD-DTI di caratterizzazione e simulazione meccanica dei m » more details

 
st.wwwsupsi@supsi.ch