Pubblicazioni meno recenti

2010

  1. Barberio, S., V. Boissonas, C. Brazzola, J. James, A. Küng. 2010. Caring for Outdoor Sculpture in Lugano, Switzerland: Preventive Conservation and Long Term Maintenance. Scienza e beni culturali XXVI. Atti del Convegno di Studi Bressanone. 253-262. Edizioni Arcadia Ricerche.
  2. Cadoni, E. , A. Caverzan, M. Di Prisco. 2010. Behaviour of High Performance Fibre Reinforced Cementitious Composites Under High Dynamic Loading and Fire for Safe Tunnels. Urban Habitat Constructions under Catastrophic Events (Proceedings) – Mazzolani (eds.). 933-938. London: Taylor & Francis Group.
  3. Cadoni, E. Dynamic Characterization of Orthogneiss Rock Subjected to Intermediate and High Strain Rate in Tension. Rock Mechanics and Rock Engineering, vol. 43: 667-676.
  4. Cadoni, E., A. Bragov, A. Caverzan, M. Di Prisco, A. Konstantinov, A. Lomunov. 2010. Mechanical response of HPFRCC in tension and compression at high strain rate and high temperature. In 7th Intern. Symposium on Impact Engineering. 121-131. Warsaw, 4-7.07.2010.
  5. Cadoni, E., A. Caverzan, M. Di Prisco. 2010. On the influence of high temperature on the dynamic behaviour of High Performance Fibre Reinforced Cementitious Composites. Concrete under severe conditions. 1331-1338. Taylor & Francis.
  6. Cadoni, E., et al. 2010. Advanced cementitious composites in design and construction of safe tunnel. In Structural concrete in Switzerland. 12-15. FIB-CH.
  7. Cadoni, E., et al. 2010. Analysis of the tensile behavior under high strain-rates of concrete and reinforcing steel as a tool for the demolition of a r.c. arch bridge. In Structural Concrete in Switzerland. 28-31.
  8. Cadoni, E., M. Dotta, D. Forni, A. Bragov, A. Lomunov, A. Konstantinov, A. Ripamonti. 2010. Mechanical characterization of steel for fastening in a wide range of strain rate. In 7th Intern. Symposium on Impact Engineering. 132-143. Warsaw, 4-7.06.2010.
  9. Cadoni, E., M. Dotta, D. Forni, S. Bianchi. 2010. Effects of strain rate on mechanical properties in tension of an aluminium alloy used in armour applications. In Failure and damage mechanisms of armour materials. Madrid, 26.11.2010.
  10. Cadoni, E., S. Antonietti, M. Dotta, D. Forni. Strain rate behaviour of three rocks in tension. In 7th Intern. Symposium on Impact Engineering. 111- 120. Warsaw, 4-7.07.2010.
  11. Caverzan, A., E. Cadoni, M. Colombo & M. Di Prisco. 2010. Comportamento dinamico ed alle alte temperature di compositi cementizi fibrorinforzati ad alte prestazioni. In Proceedings of 18° Congress C.T.E.. 597-607.
  12. De Matteis, G., E. Cadoni, Asprone. 2010. Analysis of behaviour of constructions under impact and explosions: approaches for structural
    analysis, from material modeling to structural response. In Urban Habitat Constructions under Catastrophic Events. 161-178. Taylor & Francis.
  13. Jean, G. The conservation of technical fixtures in historic buildings. In Multidisciplinary conservation. A holistic view for historic interiors, Proceedings of the Joint Interim Conference. Rome, 23-26.03.2010, ICOM-CC.
  14. Jean, G. Conservare gli impianti storici. Palazzo Jacini a Casalbuttano. Relazione presentata al convegno internazionale Edifici storici e destinazione museale: conservazione degli edifici e delle opere d’arte. Progetti per il restauro e integrazione di impianti esistenti. Milano, 1-2.04.2010.
  15. Jean, G. Intonaci cremonesi attraverso le fonti d’archivio e alcuni esempi. Relazione presentata al convegno Conservare le superfici architettoniche esterne dell’edilizia storica cremonese. Cremona, 8.10.2010.
  16. Jean, G. The conservation of technical fixtures in historic buildings. Relazione presentata al convegno internazionale Multidisciplinary conservation: a holistic view for historic interiors, Roma, 24.03.2010.

2011

  1. Bragov, A.M., Cadoni, E., Konstantinov, A. & Lomunov, A., Tension and compression behavior of pre-stressed steel strands at high strain rate.Applied Mechanics and Materials, 2011, Vol. 82, pp. 154-159
  2. Cadoni, E. & di Prisco, M., editors Performance, Protection and Strengthening of Structures under Extreme Loading. Trans Tech Publication, 2011, pp. 900
  3. Cadoni, E., Dotta, M., Forni, D. & Spaetig, P., Strain-rate behavior in tension of the tempered martensitic reduced activation steel Eurofer97. Journal of Nuclear Materials, 2011, 414(3): 360 - 366
  4. Asprone, D., Iucolano, F., Cadoni, E. & Prota, A. Analysis of the strain-rate beahavior of a basalt fiber reinforced mortar.Applied Mechanics and Materials, 2011, Vol. 82, pp. 196-201
  5. Cadoni, E. & Albertini, C., Advances in Rock Dynamics and Applications ISRM (ed.) Chapter Modified Hopkinson Bar Technologies Applied to the High Strain Rate of Rocks. Taylor & Francis, 2011
  6. Cadoni, E. Sustainability of Constructions: Integrated Approach to Life-time Structural Engineering. Chapter Assessment of the structural materials under high stain-rate in tension. University of Malta, 2011, pp. 327-338
  7. Cadoni, E., Antonietti, S., Dotta, M. & Forni, D. Strain Rate Behaviour of three Rocks in Tension. Engineering Transactions, 2011, Vol. 59 (3), pp. 1–14
  8. Cadoni, E., Bragov, A.M., Caverzan, A., di Prisco, M., Konstantinov, A. & Lomunov, A. Mechanical Response of HPFRCC in Tension and Compression at High Strain Rate and High Temperature. Engineering Transactions, 2011, Vol. 58 (3-4), pp. 95–107
  9. Cadoni, E., Bragov, A.M., Dotta, M., Forni, D., Konstantinov, A., Lomunov, A. & Ripamonti, A. Mechanical Characterization of Steel for Fastening in a wide range of Strain Rate. Engineering Transactions, 2011, Vol. 59 (2), pp. 101–117
  10. Cadoni, E., Dotta, M., Forni, D. & Bianchi, S. Strain-rate effect on high strength alloys. Applied Mechanics and Materials, 2011, Vol. 82, pp. 124-129
  11. Cadoni, E., Dotta, M., Forni, D. & Spätig, P. Mechanical characterization of EUROFER97 in tension at high strain rate 13th International Workshop on Plasma-Facing Materials and Components for Fusion Applications and 1st International Conference on Fusion Energy Materials Science. 2011
  12. Cadoni, E., Dotta, M., Forni, D. & Tesio, N. Dynamic behaviour of reinforcing steel bars in tension Applied Mechanics and Materials, 2011, Vol. 82, pp. 86-91
  13. Cadoni, E. & di Prisco, M. Performance, Protection and Strengthening of Structures under Extreme Loading. Trans Tech Publication, 2011, pp. 900
  14. Cadoni, E., Singh, N.K., Singha, M. & Gupta, N.K. High strain rate characterization of an advanced high strength steel. 3rd International Conference on Impact Loading of Lightweight Structures. Valencienne, June 28-July 1, 2011 2011
  15. Cavallo G., Moresi M. Materials, technology and provenance of ancient ceiling tiles from the ceramic district in Riva San Vitale (Southern Switzerland) I. Turbanti-Memmi (ed.), Proceedings of the 37th International Symposium on Archaeometry,49-54, DOI 10.1007/978-3-642-14678-7_7, Springer-Verlag Berlin Heidelberg, 2011.
  16. Cavallo G., Corredig G. Characterization of natural building materials at Villa Sironi, Oggiono (Italy) A. Mauko, T. Kosec, T. Kopar, N. Gartner (ed.), Proceedings of the 13th Euroseminar on Microscopy Applied to Building Materials, Ljubljana. 2011.
  17. Cavallo G., Cardani Vergani R., Gianola L., Meregalli A. Archaeological. stylistic and scientific research on 11th-13th century A.D painted fragments from the San Giovanni Battista Church in Cevio (Switzerland). Archaeometry doi: 10.1111/j.1475-4754.2011.00613. 2011.
  18. Cavallo G., Piquè F., Carazzetti R., Cattori E. Non-invasive investigations of Filippo Franzoni easel paintings. Proceedings of the Conference Science for Contemporary Art, Ferrara, 2011.
  19. Caverzan, A., Cadoni, E. & di Prisco, M. Dynamic behavior of HPFRCC at high strain rate: the fiber role High Performance Fiber Reinforced Cement Composites 2011, ISBN-10: 9400724357
  20. Caverzan, A., Cadoni, E. & di Prisco, M. Dynamic tensile behaviour of Self Compacting Steel Fibre Reinforced Concrete. Applied Mechanics and Materials, 2011, Vol. 82, pp. 220-225
  21. Coppola, L., Cadoni, E., Forni, D. & Buoso, A. Mechanical Characterization of Cement Composites Reinforced with Fiberglass, Carbon Nanotubes or Glass Reinforced Plastic (GRP) at High Strain Rates Applied Mechanics and Materials, 2011, Vol. 82, pp. 190-195
  22. Coppola, L., Cadoni, E., Forni, D. & Buoso, A. Performance of multi-scale fiber reinforced cement composites at high strain rate. L. Dezi, G. M. & Realfonzo, R. (ed.) The new boundaries of structural concrete. 2011, pp. 235-241
  23. Jornet, A., Corredig, G., Mühlethaler, U. Concretes made with Cem II/A-LL: Relationship between microstructure and properties. 13th Euroseminar on Microscopy Applied to Building Materials,14-18 June, Ljubljana, Slovenia, 2011.
  24. Portioli, F., D'Aniello, M., Cadoni, E., Borg, R. & Hechler, O. Sustainability of Constructions: Integrated Approach to Life-time Structural Engineering. COST (ed.). Chapter: Demolition and deconstruction of bridges. University of Malta, 2011, pp. 377-390
  25. Singh, N., Cadoni, E., Singha, M. & Gupta, N. Dynamic tensile behavior of multi phase high yield strength steel. Materials & Design, 2011, 32(10): 5091 - 5098.
  26. Singh, N.K., Cadoni, E., Singha, M. & Gupta, N.K. Quasi-static and dynamic tensile behavior of CP800 steel. Mechanics of Advanced Materials and Structures, 2011, in print.
  27. Singh, N.K., Cadoni, E., Singha, M.K. & Gupta, N.K. Mechanical Behavior of Advanced High Strength Steel at High Strain Rates. Applied Mechanics and Materials, 2011, Vol. 82, pp. 178-183.
  28. W. Thomas, R. Thomas, C. Paglia, B. Ralph and R. Fenn, Evaluaton of novel fibre reinforcement, Concrete, June 2011.
  29. Thomas, R. Thomas, C. Paglia, B. Ralph and R. Fenn, Novel dispersible reinforcement in combination with conventional reinforcement bar – a feasibility study, Concrete, September 2011.

2012

  1. Cadoni, E., Bragov A.M., Dotta, M., Forni, D., Konstantinov, A. and Lomunov, A. (2012) Mechanical characterization of rocks at high strain rate. EPJ Web of Conferences, 26. 01021.
  2. Cadoni, E., Caverzan, A. and di Prisco, M. (2012) Dynamic behaviour of HPFRCC in tension. EPJ Web of Conferences, 26. 01014.
  3. Cadoni, E., Dotta, M., Forni, D., Bianchi, S. and Kaufmann, H. (2012) Strain rate effects on mechanical properties in tension of aluminium alloys used in armour applications. EPJ Web of Conferences, 26. 05004.
  4. Cadoni, E., Fenu, L. and Forni, D. (2012) Strain rate behaviour in tension of austenitic stainless steel used for reinforcing bars. Construction and Building Materials, 35. 399 - 407.
  5. Cadoni, E. and Kaufmann, H. (2012) Opportunities and Challenges of Light-Weight Armour: Failure Mechanisms, Materials, Experiments and Modeling. In: Cadoni, Ezio, (ed.) SUPSI. ISBN 9788875951207
  6. Cadoni, E., Singh, N.K., Singha, M.K. and Gupta, N.K. (2012) Strain rate behaviour of multi-phase and complex-phase steels for automotive applications. EPJ Web of Conferences, 26. 05003.
  7. Caverzan, A., Cadoni, E. and di Prisco, M. (2012) Tensile behaviour of high performance fibre-reinforced cementitious composites at high strain rates. International Journal of Impact Engineering, 45. 28 - 38.
  8. Coppola, L., Cadoni, E., Forni, D., and Buoso, A. (2012) Caratterizzazione meccanica di compositi a base cementizia con fibre di vetro, di polipropilene rinforzato (GRP) e nanotubi di carbonio ad elevate velocità di deformazione. In: Proceedings of XI Convegno Nazionale AIMAT Proceedings of XI Convegno Nazionale AIMAT, 16 – 19 settembre 2012, Gaeta (LT).
  9. Evstifeev, A., Cadoni, E. and Petrov, Y. (2012) Incubation time approach to rock dynamic strength characterization. EPJ Web of Conferences, 26. 01041.
  10. Singh, N.K., Cadoni, E., Singha, M.K. Gupta, N.K. (2012) Dynamic Tensile and Compressive Behaviors of Mild Steel at Wide Range of Strain Rates. Journal of Engineering Mechanics ASCE. (In Press)
  11. Singh, N.K., Cadoni, E., Singha, M.K. Gupta, N.K. (2012) Dynamic compressive behavior of bearing steel. In: Third Asian Conference on Mechanics of Functional Materials and Structures - 2012, 6-8 December 2012, Delhi - India.
  12. Singh, N.K., Cadoni, E., Singha, M.K. Gupta, N.K. (2012) Mechanical behavior of a structural steel at different rates of loading. In: International Symposium on Engineering under Uncertainty: Safety Assessment and Management (ISEUSAM-2012), January 4-6, 2012 , Bengal Engineering and Science University, Shibpur, Howrah, WB, India.
  13. Singh, N.K., Cadoni, E., Singha, M.K. Gupta, N.K. (2012) Mechanical characterization of multi phase steel at different rates of loading. Materials Science Forum, 720. pp. 421-426.
  14. Singh, N.K., Cadoni, E., Singha, M.K. Gupta, N.K. (2012) Quasi-static and dynamic tensile behavior of CP800 steel. Mechanics of Advanced Materials and Structures. (In Press)
  15. Singh, N.K., Cadoni, E., Singha, M.K. Gupta, N.K. (2012) Strain Rate Sensitivity of Die Steel under Compressive Loads. Advanced Materials Research, 585. pp. 412-416.
  16. Singh, N.K., Cadoni, E., Singha, M.K. Gupta, N.K. (2012) Strain Rate Sensitivity of an Aluminium Alloy under Compressive Loads. Advanced Materials Research, 548. pp. 169-173.
st.wwwsupsi@supsi.ch