Nuova ricerca


Dettaglio della ricerca

Nome e cognome Giovanni Bianchi

Funzione Laboratorio materiali ibridi, ricercatore

Email giovanni.bianchi@supsi.ch

Ufficio Polo universitario Lugano, Campus Est, Viganello - B5.17 – LO-50.012
Polo universitario Lugano, Campus Est, Via la Santa 1, 6962 Lugano-Viganello

Telefono interno +41586666680

vCard

Articolo di un giornale scientifico 16 Elementi

König, R., Spaggiari, M., Santoliquido, O., Principi, P., Bianchi, G.& Ortona, A. (2020) Micropollutant adsorption from water with engineered porous ceramic architectures produced by additive manufacturing and coated with natural zeolite. Journal of Cleaner Production. » in dettaglio Bianchi, G., Ortona, A.& Padovano, E. (2019) Graphite-Si-SiC ceramics produced by microwave assisted reactive melt infiltration. Journal of the European Ceramic Society. » in dettaglio Spaggiari, M., Santoliquido, O., Bianchi, G.& Ortona, A. (2019) Formation of CeO2 coatings on Si–SiC foams by electrophoretic deposition and sintering in air. Ceramics International. » in dettaglio Bianchi, G., Ortona, A.& Vodermayer, A. (2018) Net shape CMC components produced by composite flow moulding, pyrolysis and reactive silicon infiltration. Ceramics International. » in dettaglio Ortona, A., Bianchi, G.& Casalegno, V. (2018) SiC foam sandwich structures obtained by Mo-wrap joining. Materials Letters. » in dettaglio Ortona, A., Bianchi, G., Cornolti, L.& Martinelli, S. (2018) Microwave heating controlled reactive melt infiltration for graphite‐Si‐SiC ceramics manufacturing. Journal of the American Ceramic Society. » in dettaglio Ortona, A., Bianchi, G.& Gianella, S. (2017) Design and additive manufacturing of periodic ceramic architectures. Journal of Ceramic Science and Technology. » in dettaglio Ortona, A., Santoliquido, O.& Bianchi, G. (2017) Additive Manufacturing of Complex Ceramic Architectures. International Conference on Additive Manufacturing in Products and Applications. » in dettaglio Ortona, A., Bianchi, G., Santoliquido, O.& Dimopoulos Eggenschwiler, P. (2017) Additive manufacturing of periodic ceramic substrates for automotive catalyst supports. International Journal of Applied Ceramic Technology. » in dettaglio Ortona, A., Bianchi, G., Barbato, M., Gianella, S., Scocchi, G.& Aronovici, M. (2015) Heat and Mass Transfer in Ceramic Lattices During High‐Temperature Oxidation. Journal of the American Ceramic Society. » in dettaglio Ortona, A., Bianchi, G.& Vavassori, P. (2015) Reactive silicon infiltration of carbon bonded preforms embedded in powder field modifiers heated by microwaves. Ceramics International. » in dettaglio Aronovici, M., Bianchi, G., Ferrari, L., Barbato, M., Gianella, S., Scocchi, G.& Ortona, A. (2015) Heat and Mass Transfer in Ceramic Lattices During High-Temperature Oxidation. Journal of the American Ceramic Society. » in dettaglio Ortona, A., Rezaei, E., Bianchi, G.& Gianella, S. (2014) Reticulated Ceramics Under Bending: the Non‐Linear Regime Before Their Catastrophic Failure. Advances in Bioceramics and Porous Ceramics VII: A Collection of Papers Presented at the 38th International Conference on Advanced Ceramics and Composites January 27–31, 2014 Daytona Beach, Florida. » in dettaglio Rezaei, E., Bianchi, G., Gianella, S.& Ortona, A. (2014) On the nonlinear mechanical behavior of macroporous cellular ceramics under bending. Journal of the European Ceramic Society, vol. 34 (10) pp.2133-2141. » in dettaglio Ortona, A., Scocchi, G., Grossi, L., Bianchi, G., D'Angelo, C., Leidi, T.& Gilardi, R. (2013) Evaluation of a simple finite element method for the calculation of effective electrical conductivity of compression moulded polymer–graphite composites. Composites Part A: Applied Science and Manufacturing. » in dettaglio Ortona, A., D'Angelo, C.& Bianchi, G. (2012) Monitoring sandwich structured SiC ceramics integrity with electrical resistance. NDT & E International, vol. 46 pp.77-82. » in dettaglio

Articolo in documento di una conferenza 1 Elemento

Diviani, L., Ferri, E., Bianchi, G., Cau, N., Poli, M., Bonfiglio, P.& Guanella, J. (2010) Innovative concept for High Precision Grinding Center. » in dettaglio

Progetti di cui è membro

Thermochemical HYDROgen production in a SOLar structured reactor:facing the challenges and beyond » in dettaglio Marketability - Tailor-made zeolite filter for the adsorption of micropollutants » in dettaglio Advanced direct biogas fuel processor for robust and cost-effective decentralised production of PEM- » in dettaglio SCCER3 - Electrical and Thermal Energy Storage - Phase II » in dettaglio Biogas robust reforming with combined catalytic reformer and trap units » in dettaglio Innovative concepts based on active thermal management of thermal protection systems » in dettaglio High-frequency ELectro-Magnetic technologies for advanced processing of ceramic matrix composites an » in dettaglio Multifunctional components for agressive environments in Space applications » in dettaglio Bipolar Plates made of Carbon Nano-reinforced Plastics » in dettaglio Ceramic Heat exchangers with enhanced materials properties » in dettaglio

 
st.wwwsupsi@supsi.ch